Solar charge controller, two LCD screens, USB, 12V/24V, MPPT 100A

General Description

This MPPT solar charge controller optimizes the charging of 12V and 24V batteries with 18V to 36V solar panels. Thanks to its industrial-grade main chip and real-time display of charging parameters, it offers high accuracy. Technical Specifications Condition: 100% new Material: ABS Options: 40A, 50A, 60A, 100A Battery Voltage: 12V/24V Automatic Solar Panel Voltage: 12V, 18V, 24V, 36V Float Charge: 13.7V (adjustable) Discharge Cut-off Voltage: 10.7V (adjustable) Re-engagement Voltage at Discharge: 12.6V (adjustable) Self-Consumption: < 10mA USB Output: 5V / 2A maximum Installation Install the controller as close as possible to the battery to avoid voltage drops due to excessively long cables. Ensure the battery has sufficient voltage during initial installation so the controller can recognize the correct battery type. This charge controller is compatible with various lead-acid batteries, including wet, sealed, and gel batteries. For other battery types, their specifications must be observed and the corresponding charging parameters set. Use only photovoltaic modules as the charging source; direct current or other power sources are unsuitable. The charge controller can generate heat during operation, so be sure to install it on a level, suitable surface. Further information