solar drip irrigation system kit, automatic watering system with 30 operating modes and 7 timer modes

【7 TIMER MODES】: Our solar-powered drip irrigation system has 7 timer modes, including 3H/6H/12H/1d/2d/3d/7d, allowing you to customize the watering schedule to meet your plants' needs.

【30 WATERING MODES】: The drip irrigation kit includes 1-30 different operating modes, allowing you to adjust the flow rate and watering duration to ensure optimal growth and health for your plants.

【SOLAR POWERED】: Our automatic watering system is powered by solar energy, making it an eco-friendly and cost-effective solution for your irrigation needs. Each kit comes with all the necessary components to irrigate up to 50 plants, including 5m of main tubing and 5 x 10m distribution tubing.

【Wide Range of Applications】: This solar drip irrigation system is suitable for a wide range of applications, including balconies, patios, and small gardens without taps or a fixed electrical supply.

【MULTIPLE PROTECTION MECHANISMS】: Our solar irrigation system is equipped with multiple protection mechanisms such as water level detection, motor protection, battery charging and discharging protection to ensure safe and reliable operation.

Specifications:

Case Material: ABS

Solar Panel Material: Polycrystalline Silicon

Solar Panel Production Process: Glass Lamination

Solar Panel Power: 18V 10W

Solar Panel Operating Current: 555mA

Solar Panel Size: 350x235x15mm/13.77x9.25x0.59 inches

Cable Length (22# Red + Black): 5m/16.4ft

Battery: 11.1V 2200mAh Lithium Battery

Overcharge Protection Voltage: 12.75V

Overcharge Protection Voltage: 8.1V Operating Temperature (Charging): -10℃-45℃ Storage Temperature (Discharging): -10℃-45℃ Internal Resistance: Less than 120mΩ Weight: 138g/4.86oz Lifespan: 500 cycles Water Pump: Brushed DC Water Pump Pump Power: 5W Operating Voltage: DC12V Flow Rate: 500-1200ml/min Discharging Current: 0.5A Operating Temperature: -10-45℃ Product Size: 166x114x47mm/6.53x4.48x1.85inch

Product Weight: 1.7kg/3.74lbs

Main Body Button Description:

1. ON/OFF button: Main switch,

2. Watering Time button: Adjusts working time,

3. Interval Time button: Adjusts interval time

Stop Current: Less than 500uA

Working Current: 500mA

030 Water Hose Length: 10m/32.8ft (Black PVC, 3mm inner diameter, 5mm outer diameter)

085 Hose Length: 5m/16.4ft (Black PE, 8mm ID, 10mm OD)

Water Drip Arrows: 50 (Blue arrows shaped like 7 water droplets, 100x50mm)

Water level line length: 5m/16.4ft

Product color: Dark green

Waterproof rating (main unit): IP65

Solar charging time: Approximately 4-5 hours

Control mode: Switch

Maximum water flow rate: 2L/min

Programmed watering: 1-30 min

Duration: 3H, 6H, 12H, 1d, 2d, 3d, 7d

Description:

Operating time range: 30 steps

Watering time range: 01, 02, 03...29, 30 cycles (01 operates for 1 minute, 02 operates for 2 minutes, etc.). When the current working time is reached, the motor stops and enters the interval range.)

Interval: 7 steps

Cycles: 3H, 6H, 12H, 1d, 2d, 3d, 7d (3H corresponds to 3 hours, 6H to 6 hours, 1d to 24 hours, 2d to 48 hours until the timer is reached, etc. When the running interval is reached, the motor stops and enters the working range).

Water Level Detection:

Low Water: The audible alarm sounds twice in one minute, indicating a lack of water. The alarm code E1 flashes slowly (two beeps in one minute until the water level is normal, then the audible alarm stops and the alarm code E1 disappears). At night, the buzzer does not sound an alarm; only the digital LED display shows E1 flashing slowly.

With water: The water level and the motor operate together; with water, the pump runs; without water, the pump stops.

Motor protection (idle and lock):

At idle: The digital display E2 flashes slowly, and the buzzer sounds twice per minute. (The buzzer does not sound at night; only the digital display and the E2 display flash slowly.)

Battery discharge and charge protection:

Discharge: When the battery voltage drops below 10V, the digital display flashes rapidly, and the pump shuts off. Restart the power supply, charge the battery to 10.6V or higher during the day, and then restart the pump.

CHARGE: When the battery is charged to 12.45V or higher, disconnect the charger to protect the battery. During the day, when the battery voltage drops below 12V, continue charging to complete the function.

The audible alarm only works during the day and not at night.