Solar power controller, 150W 10-12V synchronous rectification MPPT solar controller for light

1. Battery Charging: This MPPT solar controller maximizes the conversion of solar panel energy into battery charging.
2. Synchronous Rectification: This solar charge controller adopts a highly efficient synchronous rectification circuit structure.
3. Anti-Return: This solar power controller has an anti-return function. When there is sunlight, the controller charges the battery normally. When there is no sunlight, the controller can effectively prevent the battery from flowing back.
4. Multiple Protections: This MPPT solar controller supports short-circuit protection, overheat protection, solar input undervoltage protection, battery undervoltage protection, and charging port short-circuit protection.
5. Wide application: This MPPT solar controller is widely used in solar street light controllers, solar chargers, solar electric bicycles, solar electric tricycles, solar toy cars, home solar panels, solar monitoring, etc.

Specification:

Item type: MPPT solar controller.
Material: Plastic
Normally open: 24 hours charging output
Efficiency: ≥95%
Noise:< 55dB
Application: Solar street light controller, solar charger, solar electric bicycle, solar electric tricycle, solar toy car, home solar panels, solar monitoring, and other application scenarios.
Suitable for Photovoltaic Panel Specification: Open Circuit Voltage: 21 to 25V
Charger Module:
Photovoltaic Input Power: 150W
PV Input Start Voltage: >17V
PV Input Tracking Voltage: 16 to 25V
Output Current to Battery: 10A (maximum 12A)
No Load Loss: 20mA
Adjusted Voltage Rate: 1%
Adjusted No Load Rate: 5%
Full Load Ripple: 400mV
No Load Ripple: 100mV
Discharge Module:
Input Voltage: equal to battery voltage
Charge Output Voltage: equal to battery voltage
Charge Output Current: 10A
Static Power Consumption: 12mA
Charge Output Mode: normally open
Protection Module:
Battery Short Circuit Protection: yes
Charge Short Circuit Protection: yes
Thermal Protection: Yes
Reverse Reverse Protection: yes
Protection Level: IP67
Operating Temperature: -40°C to +65°C
Overheating Protection: when the internal temperature of the MPPT controller exceeds 100°C, the MPPT controller will reduce the output power. If the internal temperature continues to rise to 110°C, the MPPT controller will automatically shut off the output. When the internal temperature of the MPPT controller is below 90°C, the MPPT controller will automatically resume operation.

Package List:

1 x MPPT Solar Controller

Note:

The MPPT controller must be mounted on an iron or metal support to prevent machine vibration due to instability. The MPPT controller should have some clearance around its casing. The input and output wires should be as short as possible to avoid excessive power dissipation during transmission. There is high voltage and high current in the machine, and non-professionals are not permitted to disassemble it. The input and output terminals must be secure and not loose to prevent overheating at the connection point.