Solar-powered ultrasonic cat repeller, adjustable frequency, for outdoor use, to repel pests, garden protector

Product size: 15 × 6 × 16 cm. Product weight: 0.4 kg. Rated voltage: 5V 500mA (V). Rated frequency: 20Hz. Rated power: 5W (width). About the product: 1. The product uses a pyroelectric infrared sensor. The sensor's sensitivity to animals is related to the direction of the animal's movement. It is insensitive to radial movements and more sensitive to lateral movements. This means: If the animal is stationary or approaches the product in a straight line without lateral movement, the infrared light cannot be detected, and the product cannot affect the animal. 2. Using the principle of infrared detection, when a small animal is detected, it emits ultrasonic waves to drive the animal away. It helps protect your property, garden, and yard from stray dogs, cats, and other small animals. Since it is a portable design, it can be installed anywhere in your home, garden, or yard. This product operates on low-voltage power supplies and batteries. It only repels animals and contains no chemicals. It emits ultrasonic frequencies, driving them away without harming humans. It features 5 frequency settings: Speed ​​0: Off; Level 1: 13.5 kHz–19.5 kHz, primarily for mice, dogs, rabbits, foxes, mink, and other animals; Level 2: 19.5 kHz–24.5 kHz, primarily for cats, raccoons, badgers, skunks, and other animals; Level 3: 24.5 kHz–45.5 kHz, primarily for bats, birds, mice, and other animals; Level 4: The LED flashes brightly, which can repel snakes, raccoons, wild boars, mink, and other animals; Level 5: The LED light flashes at 5.5 kHz, driving animals across the entire frequency range while the light flashes. All functions operate simultaneously, and speeds one through five operate sequentially, accompanied by the powerful flash of the DIRECTED light. Function Description: Sensitivity Button (left): Sensitivity and detection range are adjustable. Turn the knob clockwise to gradually increase the protection range. Frequency Button (right): This button is used to adjust the ultrasonic frequency. Turn the knob clockwise, and the ultrasonic frequency gradually increases. Installation Precautions: 1. Open the battery compartment cover on the back, install 3 AA rechargeable batteries, and then close the battery compartment cover. 2. Place the product in the area to be protected (such as flower beds or walls, etc.). 3. Please choose a suitable location to ensure that the top solar panel can absorb maximum solar energy. 4. If the product is installed underground, carefully insert the ground stake into the soil. Please extend the ground stake approximately 12 cm from the ground. It is recommended to carefully insert the product after digging a hole in the ground to protect it from damage. 5. The product can be inserted into the ground, hung on a wall, or placed on other flat surfaces.