Solar-powered watering system for automatic watering of indoor plants, with timer and 15m drip irrigation hose

• Automatic watering according to your preferences: Our automatic solar sprinkler has several timer modes: you can choose the days and times for watering that suit the water needs of your plants. No more worrying about your plants wilting if you leave them unattended at home during the week or while you're on vacation.
• Anti-siphon: Our automatic watering system features an improved pump that increases the water flow to 750 ml/minute to ensure optimal water flow at each end of the drip irrigation tubing. In addition, the integrated dripper in the soil allows watering right down to the roots of the plants, creating a better growing environment and saving water.
• Cordless operation: The drip irrigation kit is equipped with a built-in 2000 mAh rechargeable battery. The solar panel recharges in full sunlight, while the system waters according to preset parameters (approximately 60 days of autonomy on a full charge). Note: Use the provided USB-C port to recharge the device in cloudy, rainy, or snowy weather.
• Usable anytime, anywhere: Our automatic watering system is IP65 waterproof and resistant to frost, rain, snow, etc. It can also be used normally. The integrated design of the solar panel and controller (programmable) allows you to choose between ground or wall mounting. Easy to use, it is suitable for both indoor and outdoor use.
• Wide range of applications: This automatic watering system is suitable for courtyards, gardens, orchards, greenhouses, raised beds, flower beds, planters, patios, balconies, etc. It is ideal for growing vegetables (tomatoes, cucumbers, broccoli, beans), fruits (strawberries, kiwis), grass, flowers, and potted plants.

Installation Instructions

1. 1. Measure and cut the required length of black tubing.
2. Connect the tubing to "IN" and "OUT".
3. Connect the inlet tubing to the filter, then place the filter in clean water.
4. Connect the outlet tubing to the T-fitting and the dripper.
5. Insert the dripper into the soil.
6. Press the "ON/OFF/MANUAL" button to turn the device on and preset the watering interval days and working time using the "DAY" and "TIME" buttons.
7. Choose the installation method and adjust the angle of the solar panel (Wall mounting/Grounded mounting)