SOLOPLAST bodywork renovation pack

Overview :
Presentation: Ideal to give a new look to your bodywork, this SOLOPLAST pack is composed of a touch-up pen, a polishing paste and a kit to renovate your headlights. The 3 products complement each other for an optimal result: erase scratches and polish the bodywork and the headlights. Advantages : Clear Bodywork Touch Up Pen Pro 9ml: Touch up: bodywork (car, motorcycle, scooter, bike, etc.), household appliances, plastic surfaces Dries quickly Protects from rust Polishing paste 200g : Restores shine and newness to plastic, gel-coat, plexiglass, paint, etc.. Headlights Renovation Pro : Treats the opacity of headlights Anti-UV protection Glossy finish High resistance to abrasion and detergents Does not yellow Features: Clear Body Touch Up Pen Pro 9ml : Capacity: 9ml Color: transparent Touching up: bodywork (car, motorcycle, scooter, bicycle, etc.), household appliances, plastic surfaces Dries quickly Protects from rust Ref. 155516 Polishing paste 200g : Capacity : 200 gr Supports : plastic, gel-coat, plexiglass, paint... Ref. 146842 Headlight Renovation Pro : Contains: a 200 ml aerosol, 4 abrasives (P400-P600-P800-P320), a degreasing wipe and a cloth. Implementation : Clear bodywork touch-up pen Pro 9ml: Support: The support must be clean, dry and free of dust or any greasy trace. Application: Shake the pen vigorously for 1 minute and make a test line of at least 2 cm before use. - Press the tip on the area to be treated. Let dry 30 minutes. - Do not wash the vehicle before 72 hours. - Wipe the tip after each use. - For best results, use Soloplast Renovation Paste at least 24 hours after applying the Clear Touch Up Pen. CAUTION: DO NOT USE ON HOT BODYWORK. Polishing paste 200g : Apply energetically the paste to renovate by describing circular movements with a cotton or a soft cloth on the surface to be treated. Finish with an intensive polishing with another soft cloth. Store in a temperate place between 10 and 20°C Use Soloplast products with care. Read the label and product information before use. Headlight Renovation Pro : Dry sand with P400, P600 and P800 abrasives to remove headlight film Remove deep scratches with P320 abrasive Remove dust and sanding residue Clean the headlights with the degreasing wipe Wipe with the blue cloth Apply the aerosol in 3 times after shaking it for 1 minute (until the balls clash) at 20 cm from the area to be treated A first thin coat for a perfect adherence and to avoid any dripping, let dry a few minutes then apply a horizontal coat and immediately afterwards a vertical coat. Packaging : SOLOPLAST bodywork renovation pack:1 x transparent bodywork touch-up pen Pro 9ml1 x polishing paste 200 g1 x headlight renovation kit pro Delivered in their original packaging
Product specification :