1/5
Spark plug thread repair kit, 5-piece set of taps and spark plug thread repair tools made of carbon steel, with inserts for repairing
Of which environmental contribution £0.01 including VAT.
Sold by Selphora
You may also like
![[NEVER USED] 6pcs Thread Taps, Tap Drill Bit, M3-M10 Metric Thread HSS Titanium Coated Tap and 1/4" Hex Shank Fluted Tapping Bits for Tapping Various Threads.](https://cdn.manomano.com/pim-media/images/medium/fddd48d151bd0d29369bf0f23e7bdc6e02e351ed.jpg)
Compare with similar items
Product information
Description
Application: New spark plug. A good tool kit is used to repair damaged spark plug threads and extend spark plug life. Used to clean and reattach the spark plug terminal to the engine. If you know how to use a ratchet or wrench, this kit will allow you to repair the spark plug without having to remove the valve head.
Size: The thread repair tool comes with four sizes of spark plug inserts with different 14mm thread sizes. The tap is tapered so the tip fits the hole and re-drills the hole to fit the coil. Measure the diameter, thread, and pitch of the connector to determine if the kit is compatible.
Easy to install: Rotate the crankshaft to ensure no ports/valves are open.
Use the tap to install the new thread, select the appropriate insertion depth, and then screw it firmly into the new tap head. Grease the hammer (not included) to catch the metal shavings (instead of letting them fall into the hole) and rotate each half-circle a full turn. Materials: The spark plug thread repair tool is made of carbon steel with a fine finish.Features
- BrandOTHERS
- Pcs per pack1
- Metric thread not standard threadM14
- MaterialSteel
- Type of tools includedSockets and ratchet
- ManoMano ReferenceME224195885
- MMID524768370362
- Product codeLINM-50682
- EAN4016828690176
Advice from
Taps and dies buying guide
Taps and dies are essential to make or re-thread a screw, a nut or any other mechanical element. The three-piece tap sets are the most commoly used and the tap wrench is as important as the die stock for a proper tapping. Drilling is required before tapping.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}