CHARNWOOD W030 Woodworking Spindle Moulder,Sliding Carriage,30mm Spdle

Cast Iron Main Table
Cast Iron Tenoning Table
Cast Iron Cutter Hood
1/2” Routing Collet Included
4 Speeds; Softwood, Hardwood, Routing, Sanding
Maximum Tooling Diameter 160mm
Independently Adjustable Fences
100mm Diameter Extraction Outlet
Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops.
A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic recently upgraded spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.

A simple belt change selects the correct spindle speed for the tooling. The new 4 speed version provides even more versatility;
1500rpm – Drum Sanding * optional extra
4500rpm – Moulding Hardwoods
6500rpm – Moulding Softwoods
8500rpm – Routing **
The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is recommended to cope.

Supplied with sliding carriage, Set of spindle shims, 1/2″ Routing collet, adjustable height rubber feet, 1.9m power cable and UK 3 pin plug.
Runs off any standard 13amp, 240v electric supply.

Charnwood W030 Specification
Motor (induction) 1500w, 240v
Main table size 600mm x 400mm
Sliding table size 400mm x 180mm
Spindle diameter 30mm
Speeds 4 (1500, 4500, 6500 & 8500rpm)
Vertical stroke 110mm
Table aperture diameter 160mm
Table aperture depth 50mm
Table height 870mm
Fence size 125mm x 700mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 830mm x 1070mm x 1280mm
Weight 95kg
Rating Light trade
Product Guarantee 5 Years