SSM3 SSM4 V2022.1 WiFi Auto Diagnostic Tool - Multilingual OBD2 Code Scanner for SUBARU

Features:

1. Fitment: Replacement for SUBARU. The SSM3 software version is V2022.1, which supports vehicles from 2005 to 2022. The software version of SSM4 is V28.60, which supports vehicles after 2016.
2. Programmable Smart Key: The smart key can be programmed (requires original online account) and only supports one system diagnosis. Fully compatible with SAE‑J2534.
3. All system diagnostics. Selecting this item displays on a single screen the fault detection status of all control modules in the control system for which SSMΙΙΙ diagnostics is supported and diagnostic codes stored.
4.High Compatibility: Adopting a special dual-cell automotive processor and supporting Wi-Fi, the car diagnostic scanner is fully compliant with all vehicle protocols, featuring an auto-determination design for adapters and cables.
5.Multilingual: The diagnostic tool supports English, German, Spanish, French, and Italian; SSM4 Language: English, Japanese, French, German, Spanish, Italian, Russian, Chinese, Polish (SSM3 and SSM4 languages ​​can be changed).
Specifications:Item Type: Car Diagnostic Tool
Material: ABS
1.Software Version: V2022.1 (Software version will be updated to the latest original factory version)
2.Supports vehicles from 2005 to 2022, SSM4 supports vehicles from 2016 onwards
3.The smart key can be programmed (requires an original online account) and only supports single-system diagnostics.
Technical parameters:
Network processor: 32-bit 560 MHz processor; 32-bit Flash; 128 MB DDR;
Protocol processor: 32-bit ARM 180 MHz processor, 1 MB Flash;
Diagnostic interface (vehicle): ISO22900-1 Standard 26-pin Diagnostic Interface;
DOLP interface (vehicle): Wired interface (PC): USB13400-4.All system diagnostics.Selecting this item displays the fault detection status of all control modules in the control system for which SSM1111 diagnostics are supported, along with any stored diagnostic codes, on a single screen.
2. Each system check. Selecting this item allows you to choose a specific system from among the control systems for which SSM1i1 diagnostics are supported and perform a fault diagnosis. This item can be used to display input/output data from the system's control modules that perform fault diagnostics, stored diagnostic codes, and other data on the PC display.This menu item is also used after the repair work is complete to clear diagnostic codes, configure control module settings, etc.
3.Displaying Recorded Data.This item can be used to record various sampled data during fault diagnostic operations and to load data for viewing after the work is completed.
4.Immobilizer.This item records immobilizer data.
5.Reprogramming.This item reprograms the control module.
6. Read the measurement data from the CF application. This component reads the autonomous measurement data recorded on a CF card to your PC's hard drive.
7.Convert the measurement data recorded on the dash recorder.Loads the sampled data from the CF card on the dash recorder to the PC, and converts and saves this data.
8.Oscilloscope.After attaching the optional analog pulse cartridge to the SDI, connect the pulse and analog box to the SDI and use the analog pulse probe to perform analog sampling.However, we do not supply the analog pulse cartridge.
9. Replacing the program for the Subaru Smart Key (requires an online account)

How to use:How to install: 1. Click on Launcher.exe, first to install SSM3, then to install SSM4 2. After completing all the steps in the video, you need to use the Subaru patch replacement. Unzip the file, save SubaruReplacement.exe to your C or D drive, and install it on Windows 7 or later. Right-click to run. Please note that you should not have any antivirus or Windows Defender installed on your PC, as this will damage the patch. 3. Restart your laptop. Click on SSM3 to test the car after connecting the device to both your laptop and the car.
Package List:1 x XCAR Diagnostic Tool
1 x OBDII Cable
1 x USB Cable
1 x Network Cable