Stainless steel pressure transducer/sensor sender for oil, fuel, air, and water (100PSI)

1. This is an advanced pressure transducer compared to traditional mechanical pressure transducers. 2. ±2% FS small output error, including non-linear error, hysteresis, and repeatability; full temperature range. 3. Lightweight and small size, easy to install and use. 4. It has complete overvoltage protection. 5. Works for oil, fuel, diesel, gas, water, and atmospheric pressure; can be used in oil tanks, gas tanks, diesel tanks, etc.

Specification:

Features: This is an advanced pressure transducer compared to traditional mechanical pressure transducers. ±2% FS small output error, including non-linear error, hysteresis, and repeatability; full temperature range. Lightweight and small size, easy to install and use. It has complete overvoltage protection.

Works for oil, fuel, diesel, gas, water, atmospheric pressure; can be used in oil tanks, gas tanks, diesel tanks, etc. Specifications: Material: Stainless steel Voltage: 5VDC Pressure: 30 psi, 100 psi, 150 psi, 200 psi, 300 psi, 500 psi (optional) Thread type: 1/8" NPT 30 psi Input: 0-30 psi Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 15 psi outputs 2.5V, 30 psi outputs 4.5V. Accuracy: Within 2% of reading (full scale). Thread: 1/8"-27 NPT. Wiring connector: Waterproof quick disconnect. Matching connector included. Wiring: Red for +5V; Black for ground; Blue for signal output. 100 psi Input: 0-100 psi Output: 0.5V to 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V. Accuracy: within 2% of reading (full scale). Thread: 1/8"-27 NPT Wiring connector: Waterproof quick disconnect. Mating connector and wiring harness (pigtail) are included. Wiring: Red for +5V; Black for ground; Blue for signal output. Input: 0-150 psi Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V Accuracy: +/-0.5% FS Thread: 1/8" NPT Wiring: Red for +5V; Black for ground; Green for signal output Overload capacity: 2 to 4 times the nominal pressure Operating temperature: -40℃~+120℃ Compensation temperature: 0℃~+80℃ Protection class: IP67 Pressurized medium: Oil, gas and water compatible with 316L stainless steel Load resistance: ≤ (supply power-6.5 V/0.02 A) Ω Long-term stability: less than 0.1% FS/year Temperature effect on zero: Typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Temperature effect on sensitivity: Typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Shock resistance: 1000g Shock resistance: ≤+/-0.01% FS (X, Y, Z axes, 200Hz/g) Response time: ≤1ms Insulation resistance: >100mΩ 500VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1 200 psi Input: 0-200 psi Output: 0.5V to 4.5V linear voltage output. Outputs: 0 psi 0.5 V, 100 psi 2.5 V, and 200 psi 4.5 V. Operating temperature: -40~+125℃. Accuracy: ±1% PE. Thread: 1/8"-27 NPT. Overload capacity: 2 times rated pressure. Pressurized medium: Oil, gas, and water compatible with 316L stainless steel. Load resistance: ≤ (supply power - 6.5 V/0.02 A) Ω. Long-term stability: ±0.2% FS/year. Temperature effect on zero: Typical: ±0.02% FS/℃; Maximum: ±0.05% FS/℃. Temperature effect on sensitivity: Typical: ±0.02% FS/℃; Maximum: ±0.05% FS/℃. Shock resistance: 100g Shock resistance: ≤±0.01% FS (X, Y, Z axes, 200Hz/g) Response time: ≤1ms Insulation resistance: >100mΩ 500VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3 Wiring connector: quick-disconnect, waterproof. Mating connector and cable harness (pigtail) are included. Wiring: Red for IN+; Black for GND; Green for OUT. Input: 0-300 psi Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V Accuracy: +/-0.5% FS Thread: 1/8" NPT Wiring: Red: +5V; Black: ground; Green: output signal Overload capacity: 2 to 4 times the rated pressure Operating temperature: -40~+120℃ Compensation temperature: 0℃~+80℃ Protection class: IP67 Pressurized medium: Oil, gas and water compatible with 316L stainless steel Load resistance: ≤ (supply power-6.5V/0.02A) Ω Long-term stability: less than 0.1% FS/year Temperature effect on zero: typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Temperature effect on sensitivity: typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Shock resistance: 1000g Shock resistance: ≤+/-0.01% FS (X, Y, Z axes, 200Hz/g) Response time: ≤1ms Insulation resistance: >100mΩ 500VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1. 500 psi Input: 0-500 psi (gauge pressure) Output: 0.5 to 4.5V linear voltage output. Outputs: 0 psi 0.5V, 250 psi 2.5V, and 500 psi 4.5V. Accuracy: +/-1% FS. Thread: 1/8" NPT. Wiring: Red for +5V; Black for ground; Yellow (Green) for signal output. Overload capacity: 2 to 4 times the rated pressure. Operating temperature: -40℃~+120℃. Compensation temperature: 0℃~+80℃. Protection class: IP67. Pressurized medium: Oil, gas, and water compatible with 316L stainless steel. Load resistance: ≤ (supply power - 6.5V/0.02A) Ω. Long-term stability: less than 0.1% FS/year. Temperature effect on zero: typical: 0.02% FS/℃; maximum: 0.05% FS/℃. Sensitivity: Typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Shock resistance: 1000g Shock resistance: ≤+/-0.01% FS (X, Y, Z axes, 200Hz/g) Response time: ≤1ms Insulation resistance: >100mΩ 500VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1. Package includes: 1 x pressure transducer (with cable)