Stainless Steel Titanium Plate Soldering Pot, AC110V 60Hz 150W Lead-Free Soldering Pot Desoldering Bath 50mm 200-450 ℃

1. Electronic temperature control plate, adjustable temperature and automatic constant temperature. 2. Easy to use and maintain, excellent heating effects. 3. The furnace is made of high-quality stainless steel sheet, heat-resistant, sturdy, and durable. 4. The temperature can reach up to 450°C, quickly melting tin. 5. Widely used in transformers, coil pin tinning, electronic transformers, electronic wire production, etc. Specification: Description: The soldering pot has the advantages of small size, easy placement, a wide temperature adjustment range, automatic constant temperature, high precision, low power consumption, energy saving, rapid heating, and a long service life. It is widely used in transformers, coil pin tinning, electronic transformers, electronic wire production, etc. Features: 1. Electronic temperature control plate, adjustable temperature and automatic constant temperature. 2. Easy to use and maintain, excellent heating effects. 3. The furnace is made of high-quality stainless steel sheet, heat-resistant, sturdy, and durable. 4. The temperature can reach up to 450°F, quickly melting tin. 5. Widely used in transformers, coil pin tinning, electronic transformers, electronic wire production, etc. Specifications: Material: Stainless steel - titanium plate Input Voltage: 110VAC 60Hz Plug Type: US plug Power: 150W Temperature Range: 200°F-450°F Melting Time: Approx. 8 minutes Capacity: 500g Slot Diameter: 50mm/1.97 inches Package Includes: 1 x Soldering Pot. Note: 1. This product must be grounded. Improper grounding installation is prohibited. 2. Set the control dial to the high range when you begin using the soldering pot, then set the dial to the automatic temperature setting after soldering. 3. The general working temperature of the solder molten in the soldering pot is 300 to 350°C (approximately 4-9 degrees). The molten solder temperature should not be too high, otherwise it will cause the soldering pot to age, resulting in blackening or yellowing of the solder. 4. When highly acidic descaling powder is applied, the soldering pot is more susceptible to corrosion or perforation at extremely high temperatures. 5. The power supply must be turned off before leaving to prevent accidents.