STC-1000 Digital Temperature Controller with Waterproof Probe, 220V, Dual Relay Thermostat, Cooling and Heating

【Connect Heater and Cooler Simultaneously】No more frequently changing the wiring between the heater and cooler. This temperature controller with a sensor has 2 relays. Compared to other temperature controllers with 1 relay, you can wire 2 devices (heater and cooler) at the same time. Please note that there are no plugs; wiring is not required. 【Maintain Temperature Within Desired Range】This is an on/off control mode. Control the temperature by adjusting the temperature setting, and the difference between heating and cooling modes can be automatically switched. Fully utilizing the STC microcontroller and NTC probe, this temperature controller has high accuracy. 【High Precision】Made of a sturdy, flame-retardant ABS plastic shell with an integrated structure, this dual-relay digital thermostat is safe and energy-efficient. Power consumption: ≤3W, temperature control range: -50℃~99℃, accuracy: ±1℃, power supply: 110-220Vac 50Hz/60Hz, output: 2 relays, Cool/Heat (10A/250Vac). 【Multifunctional】This incubator thermostat supports temperature calibration, compressor delay protection, and alarms when the temperature exceeds the limit or in case of sensor error. All parameter settings can be saved after restarting. 【2m Waterproof Probe】This digital temperature controller can be used in humid and aquatic environments. Such as aquariums, seafood processing machines, aquaculture, hatcheries, terrariums, vivariums, seedling heating mats, incubators, brewing equipment, freezers, water tanks, refrigerators, industrial chillers, fermentation equipment, industrial equipment, etc. Specification: Temperature control range: -50 ~ +99 °C Differential setpoint value: 0.3 ~ 10 °C Accuracy: ±1 °C Measurement input: 2m waterproof probe Power supply: 220VAC 50/60Hz Output relay: Two 10A/250VAC Cool relays; Heat 10A / 250VAC Size: 75 mm * 34 mm * 85 mm Power consumption: ≤3W