Stove fan (6 pages): Stove fan with thermometer, heat-powered fireplace fan, pellet fan for wood stoves

【Improved 6-Blade Chimney Fan】 Compared to conventional 5- or 4-blade chimney fans, the improved 6-blade chimney fan heats up faster and generates a larger volume of air. It is made of anodized aluminum and will not rust or corrode, even at high temperatures. Thanks to its stable base, it will not wobble or tip over, even at maximum wind speed. A magnetic thermometer for monitoring the stove temperature is included.

【Longer Lifespan and Overheating Protection】 The stove fan is equipped with a high-temperature resistant chip. It typically operates between 55°C and 75°C. It achieves its highest efficiency at a temperature of approximately 250°C to 300°C. If the surface temperature exceeds 350°C, a safety device is activated. A bimetallic element on the underside of the fan lifts its front, protecting the motor.

Energy-saving and environmentally friendly】This thermally powered stove fan requires neither batteries nor electricity. It circulates the hot air generated by wood, coal, or pellets. Equipped with a new, improved motor and 6 blades, it enables efficient heat circulation from the combustion chamber while also improving stability. It has been proven to reduce fuel costs by 37% and decrease wood consumption in the stove.

Quiet and easy to use】No installation required, simply place it on the stove. It operates quietly with a noise level below 25 dB. Measure the temperature at the fan's installation location with a thermometer. It can be used in a temperature range of 80°C to 300°C. Place the thermometer near the fan to monitor the temperature (the temperature difference with a magnetic thermometer is typically around 10°C).

【Instructions for Use】1. The stove fan gets very hot. Wear gloves or wait until it has cooled down before moving it. 2. Are the fan blades loose? Use the included screwdriver to tighten them. 3. Do not place the fan in areas accessible to children or pets. 4. If you have any doubts about compatibility with your fireplace, please contact us beforehand.