Suitable for guide plate screws, guide plate fixing screws, guide plate adjusting screws and guide plate mounting screws of the Husqvarna 365 and 372 chainsaws.

Guide bar mounting bolts are among the most stressed fasteners on a chainsaw. They ensure a secure connection between the guide bar and the machine frame, preventing loosening, slippage, or falling off at high cutting speeds. They also secure the sprocket cover, protecting the clutch and small sprocket. Over time, the following problems can occur with guide bar mounting bolts: thread wear or damage leading to insufficient tightening torque, worn hex heads that make loosening difficult, and breakage or loss of the bolts due to frequent assembly and disassembly. These problems compromise user safety and can even lead to the guide bar coming loose and causing accidents. This product was specifically designed for the Husqvarna 365 and 372 chainsaws and is precision-manufactured from high-quality alloy steel. The bolts undergo a special heat treatment that gives them high strength and toughness. This allows them to withstand the considerable tensile forces and vibrations generated during chainsaw operation without deforming or breaking. The precision-machined threads ensure a perfect fit in the threaded holes of the machine housing, easy tightening, and optimal holding power. The standard screw head size guarantees precise tightening with sockets or wrenches, prevents loosening, and facilitates daily disassembly and maintenance. The surface is rust-resistant and resistant to external moisture and oil corrosion, so no rust or seizing occurs even after prolonged use. Installing these guide plate screws ensures reliable attachment of the guide plate, making cutting operations safer and more stable. As a high-quality replacement part, this product offers an economical maintenance solution. It is recommended to regularly check the tightness of the guide plate screws. Loose screws should be tightened immediately; worn threads, damaged heads, or broken screws must be replaced immediately. When replacing, it is recommended to apply a small amount of threadlocker or anti-seize grease to ensure a reliable, lasting hold and to facilitate later disassembly.