1/5
SUP Pump Adapter for Inflatable Boats, Standard Schrader, Conventional Air Pump, Air Valve Adapter, Spoke Plate Mount
Of which environmental contribution £0.01 including VAT.
Sold by LinzGain Sarl
You may also like
Compare with similar items
Product information
Description
With the inflatable valve adapter, you can connect any standard electric pump, foot pump, or compressor to the Schrader valve connector, the standard tire valve for cars and bicycles. It is compatible with most inflatable boards. It is also suitable for boats and kayaks that use the Halkey-Roberts valve for inflation. You can easily reach 20 psi with your compressor or tire pump. Be careful not to over-inflate your board or boat and check the pressure regularly. This is an adapter only. The speed at which your board inflates depends on the pump used. Since compressors/tire pumps take time to inflate, we recommend first inflating the board with a hand pump until it becomes difficult to pump, then using the adapter to complete the inflation. Remove the valve cap from the SUP board and ensure the valve is sealed for inflation by turning the center screw outward/closed. Insert the adapter into the SUP valve, just as you would with the pump hose. Connect a standard Schrader pump to the valve adapter to inflate the board.
Features
- BrandSNQ
- Weight150 g
- MaterialPlastic
- Connection configurationMale
- Pcs per pack1
Advice from
Air tools and accessories buying guide
Air compressors are no good without the accessories needed to run them. Tools and components like tyre inflators, air spray guns, air fittings and air hoses should be chosen to match your air compressor in terms of pressure rating and flow rate. Got a few small jobs to tackle? An air compressor kit will get you far!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}