1/4
Swimming pool level controller, automatic float valve for water level - integrated side inlet - float valve controller for car wash - for swimming pool, tank (20 mm)
Of which environmental contribution £0.01 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
General Description
The pool level controller is an automatic float valve designed to maintain the water level in various systems such as swimming pools, tanks, and toilets. Its patented design allows for fully automatic control without requiring a power supply, thus offering a sustainable and environmentally friendly solution.Technical Specifications
- Estimated Flow Rate: Up to 40 psi (3 gallons per minute) and 60 psi (5 gallons per minute)
- Operating Pressure Range: 1 to 12 kg
- Applicable Average Temperature: 0-100°C
- High Average Temperature: 10°C to 70°C
- Materials: Food-grade plastic, 304 stainless steel, nylon, and rubber
- Inlet/Outlet Diameter: 1/2" BSP male thread
Installation
- Secure the water supply hose to a horizontal surface
- Connect the automatic water level control valve to the supply water according to the standard
- Ensure the float is vertical after installation
- If installed from the top, an elbow is required for the connection
- Clean impurities from the pipe before installation to prevent blockages
Operation
- The shut-off valve must be fully open during use
- If two valves are installed in the same tank, they must be kept at the same level
- In case of poor water quality, regular valve maintenance is recommended
- If the water filling time increases, it is advisable to recharge and flush the water inlet
Other information
- The color of the item may vary depending on your computer's display and brightness settings
- Due to manual measurement, there may be a difference of 0.1 to 2 cm
Features
- BrandTEHTUY
- Length1 cm
- Width1 cm
- Height1 cm
- Weight1 g
Advice from
Pool maintenance products buying guide
At the start of the season or during regular pool maintenance, choosing the right product for your needs can be tricky. What can we find out from water analysis? Do I need to add a pH regulator? Chlorine? Bromine? Clarifier?... We'll 'clarify' it all for you!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}