Switch of transfert automatic double power 2P AC230V 50/60Hz 80HAS Controller of synchronization fast Fitment on rail 35mm

General Description

This switch of transfert automatic double power 2P is designed for ensure a transition fast between power supply main and power supply of emergency, ensuring thus a continuous of service without interruption. made of materials PC flame-retardant, it offers a excellent insulation and a resistance to the temperatures temperatures. thanks to its contact in silver, the conductivity and the durability of the product are significantly improvement. It takes in load two modes of operation : automatic and manual, and is designed for a fitment on rail standard of 35 mm, ideal for the coffrets of distribution PZ30.

Technical Specifications

Item Type : switch of transfert automatic to double power supply

Material : PC, silver

Voltage insulation : AC690V

Rated Voltage : AC400V

Voltage of operation rated : 230VAC

Voltage of control rated : 220 VCA 85 % to 110 % Us

Level : level PC

Specifications : 2P

service life electric : 2000 cycles

service life mechanical : 5000 cycles

Current of short-circuit rated : 50ka

Fuse : RT16-00-63HAS

Rated Voltage of hold to the pulses : 8kv

Circuit auxiliary : two relay with two sets of contact soumis

Installation

The switch is designed for a fitment on rail standard of 35 mm, facilitating thus its installation in coffrets of distribution. make sure of respecter the conditions installation, especially position exceeding not 2000 meters.

Use

For use the switch, output the product and follow the instructions provided in the user manual. It is essential of check that the temperature ambient remains between -5 ℃ and 40 ℃ for a operation optimal.

Other Information

The temperature ambient maximum must not exceed 40 ℃, the minimum must not be lower to -5 ℃, and the temperature average on 24 hours must not be upper to 35 ℃. When the temperature maximum reaches 40 ℃, moisture relative must not exceed 50 %; to -5 ℃, moisture relative can be more high. measurements must be socket for prevent the condensation on the surfaces of the product due tos variations of temperature.