1/4

T-Bug XT60 2-6S Lipo Battery Charger Parallel Balanced Loading Cardboard Board with Parallel Balanced Loading Board

~~£57.15~~

Of which environmental contribution £0.01 including VAT.

Sold by Sinocor GmbH

Product information

Description

General Description

This T-Bug XT60 LiPo battery charger is designed for optimal safety thanks to its thickened copper foil and 40A fuse, ensuring a stable charging current. It is equipped with built-in short-circuit protection, preventing incidents related to overcharging. Its plastic casing is wear-resistant and offers a comfortable grip.

Technical Specifications

Material: Plastic
Connectors: 6 XT60, 1 T-plug
Maximum Current: 30A
Cells: 2 to 6S
Voltage: 0 to 22.2V DC
Capacity: 6 packs (same state of discharge and number of cells)

Installation

Connect both ends of a balance cable to the balance port of the charger and the parallel charging board, respectively.
Connect the power port of the parallel charging board to the output port of the balance charger.
Plug in the balance heads first, then connect them to the battery outputs.

Usage

This charger is used to charge LiPo batteries in parallel, allowing simultaneous charging of multiple packs while maintaining a charge balance between them.

Features

Brand
TEHTUY
Voltage
1 V
Height
1 cm
Width
1 cm
Length
1 cm
Material
Plastic
Type of vehicle
Car
ManoMano Reference
ME98600174
MMID
200819281840
Product code
mano-HWLX-01765
EAN
6282768297296

Advice from

Jump lead buying guide

Jump leads are an invaluable piece of kit in the event of a flat car battery. Select them according to your engine type, the quality of their clips, the amperage of your battery and the length of the cables. You will also have to choose a cable cross section; the most common options are 25 mm², 35 mm² or 50 mm².

Read our guide

You are here: