TDA7492 50W+50W Audio Receiver Digital Integrated Power Amplifier Board CSR8635 Bluetooth V4.0

1、Digital amplifier has a higher overload capacity than analog amplifier, and it won't cause crossover distortion, transient inter modulation distortion and you don't have to worry about the loudspeaker internal resistance

2、It supports Bluetooth V4.0 audio input and DC 8V to 25V voltage input

3、Using NE5532 pre-amp, and TDA7492 chip for dual channel of 50W+50W power output

4、Sound quality is very good by using this audio power amplifier module

5、Applicable speaker impedance are 4, 6, 8ohm, great for turning normal speaker into Bluetooth speaker

Description:

This

is an audio power amplifier board that strengthens low-power, inaudible

electronic audio signals such as the signal from radio receiver or

electric guitar pickup to a level that is strong enough for driving

loudspeakers or headphones. Power amplifiers make the signal audible to

listeners. It is the final electronic stage in a typical audio playback

chain before the signal is sent to the loudspeakers and speaker

enclosures.

Features:

Digital

amplifier has a higher overload capacity than analog amplifier, and it

won't cause crossover distortion, transient inter modulation distortion

and you don't have to worry about the loudspeaker internal resistance.

It supports Bluetooth V4.0 audio input and DC 8V to 25V voltage input.

Integrated amp uses NE5532 pre-amp, and TDA7492 chip for dual channel of 50W+50W power output.

Sound quality is very good by using this audio power amplifier module.

Applicable speaker impedance are 4, 6, 8ohm, great for turning normal speaker into Bluetooth speaker.

Specifications:

Chip: TDA7492

Audio Input: Bluetooth V4.0

Output Power: 2x50W

Suitable Speaker Impedance: 4ohm, 6ohm, 8ohm

Input Voltage: 8V~25V DC(2.1mm jack)

Size: 84 x 50mm / 3.3 x 1.97"

Package Includes:

1 x Amplifier Board