Temperature controller - 230V plug - With probe - Digital hygrostat - Humidity controller with alarm - For humidifiers, dehumidifiers and terrariums

operating modes: Press the MODE button to switch between the following modes: humidification mode, heating mode, dehumidification mode, and cooling mode. To switch between °C and °F, press and hold the SET button for 3 seconds. You can configure the desired mode according to your needs.
【Humidity/Temperature Calibration】 Press and hold the "UP/CLK" button to calibrate the humidity and temperature in real time. Humidity calibration range: -10 to 10% RF. Temperature calibration range: -9.9 ~ 9.9 ℃. After calibration, press and hold the "Mode" button to save the calibration results and complete the calibration.
【Humidity/Temperature Control】 Humidity control range: 20-95% F. Temperature control range: -10 °C to 50 °C. Set the humidity/temperature start and end points to operate connected devices according to the programmed schedule. An alarm function can also be configured. The thermo-hygrometer will sound an alarm when the humidity/temperature exceeds the preset thresholds. 【Smart Timer】This temperature/humidity controller features a smart timer function, including a cycle timer and a countdown timer. You can set cycle times from 0 to 99 hours and 59 minutes to operate your devices on a preset schedule. Please note that temperature control and timer functions cannot be used simultaneously, which increases the application's flexibility. 【Versatile Applications】Our temperature and humidity controller is suitable for a variety of uses. Whether in refrigerators, incubators, reptile enclosures, chicken coops, aquaculture facilities, greenhouses, humidifiers, or dehumidifiers, this device meets all the requirements for precise climate monitoring. It is ideal for any area where precise temperature and humidity control is needed.