Temperature controller, solar water heater EW-801A solar temperature difference temperature controller start-up temperature control panel

Functionality:

Heating under load: after temperature stabilization, the nominal current is less than 80 °C for a value less than 50 A; It does not exceed 120°C for a value greater than 50 A.

This product protects the ammeter and helps it measure very high currents.

Very simple to use, there's no need to buy a new, expensive ammeter to measure higher currents.

The ammeter's measurement accuracy remains unchanged: accuracy level: 2 to 4,000 A, level 0.5; 5,000 to 10,000 A, level 1.

Compact and practical, it is an excellent tool for measuring current.

Specifications:

Accuracy level: 2 to 4,000 A, level 0.5; 5000 ~ 10000 A, Level 1.

Temperature: -40 to +60 °C, relative temperature ≤ 95% (35 °C).

Overload protection: Rated current 120%, 2 hours.

Contents:

1 shunt resistor.

Note:

The actual color of the product may differ from the picture due to lighting.

Product dimensions may vary slightly.

Please note that the new and old models of this product will be sent randomly. Please make sure you don't mind this before ordering.