TempU05 Single-Use Temperature Data Logger, Disposable USB Temperature Recorder, PDF Report for Food, Pharmaceuticals, and Chemicals (TempU05)

1. Widely used for monitoring food, medicine, chemicals, and other transportation and storage processes.

2. Once recording is complete, you can directly insert the data into your computer to obtain the PDF report. 3. Built-in USB connector; connect directly to a PC or mobile phone—no cables or drivers required. 4. High accuracy (±0.5°C) and high sensitivity. 5. Small and compact size, easy to carry. 6. Wide temperature measurement range; it can store 10,000 data points.

Specification:

Condition: 100% Brand New Item Type: Temperature Recorder.

Material: Plastic Color: As shown in the picture Size: Approx. 67x28mm/2.64x1.1 inches (L x W) Weight: Approx. 13g/0.5oz Type: Single Use Recording Interval: 10 minutes Accuracy: ±0.5℃ (-20℃~+40℃) Out of Range: ±1℃ Data Capacity: 10000 Alarm Temperature Range: <2℃ or >8℃ (<35.6℉ or >46.4℉) Start-up Delay: 30 minutes Working Environment Temperature: -30℃~+60℃ Battery: CR2032 210mAh battery (included) Instructions: 1. Press and hold the "Start/Stop" button for more than 3 seconds. The "OK" indicator will light up for 3 seconds, indicating that The device will begin recording, and you can then place it in the environment you need to monitor. 2. During the recording process, the device will automatically turn on every 10 seconds. If the normal indicator light (i.e., the green light) illuminates every 10 seconds, it means the device is not overheating during the recording process. If the alarm indicator light (i.e., the red light) illuminates every 10 seconds, it indicates that overheating has occurred during the recording process. Note: As long as overheating is detected during the recording process, the green light will not illuminate. 3. Press and hold the "Start/Stop" button for more than 3 seconds; the alarm indicator light (i.e., the red light) will illuminate for 3 seconds, indicating that the device has stopped recording. Recording will also stop automatically when the device is full. Once the device has stopped recording, the indicator light will not flash automatically. If the device overheats during recording, press the "Start/Stop" button. If the normal indicator light (green) is on, this indicates that the temperature is not being over-recorded. If the alarm indicator light (red) is on, this indicates that the temperature is overheating during recording. 4. Remove the waterproof packaging bag and insert the device into the computer's USB port. During the PDF generation process, both the normal indicator light (green) and the alarm indicator light (red) will illuminate. When the file is generated, the normal indicator light (i.e., the green light) will remain on until the recorder is removed from the computer. Package List: 1 x Temperature Recorder Note: 1. Please allow 1-2 cm error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same way, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Do not disassemble the packaging. Before testing, turn on the machine, press Start, and the indicator light will illuminate for 10 seconds, indicating that the product is working correctly. It will begin recording after 30 minutes of power-on time (do not press STOP). Connect the computer. Press STOP (do not press STOP if you do not want to record) and connect the computer. This product cannot be used again after a single use.