Terminal crimping pliers + 60 terminals kit - AWG 10-0, 6/10/16/25/35/50 mm²

Product description

This wire crimping tool kit comes with professional crimper and terminals. Easy access to cable lugs and terminals.

The material is carefully selected, the workmanship is fine, the product is used for various purposes, and the crimping effect is good, saving time and effort. Wear-resistant handle design, comfortable to hold and easy to use.

Battery cable crimpers include 6 dies for 10/8/6/4/2/0 (6-50mm²) gauge terminals and cables.

Parameters overview

Standard crimp size 6

AWG AWG 10/8/6/4/2/0, 6/10/16/25/35/50 mm

SC6-6(10PCS);SC6-8(10PCS);SC10-6(10PCS);SC10-8(10PCS);SC16-6(5PCS);SC16-8(5PCS);SC25-6(5PCS);SC25-8(5PCS)

step 1

Cut and strip the wire of what you want to crimp

step 2

Press the spring die on both sides, rotate the gear to the correct size for the cable and release the spring to lock

step 3

Select the appropriate terminal, then place it in the wire and press firmly

step 4

If it leaves a ridge, simply rotate the connector 90 degrees and crimp it again, which will make the connection tighter

Product description

This wire crimping tool kit comes with professional crimper and terminals. Easy access to cable lugs and terminals.

The material is carefully selected, the workmanship is fine, the product is used for various purposes, and the crimping effect is good, saving time and effort. Wear-resistant handle design, comfortable to hold and easy to use.

Battery cable crimpers include 6 dies for 10/8/6/4/2/0 (6-50mm²) gauge terminals and cables.

Parameters overview

Standard crimp size 6

AWG AWG 10/8/6/4/2/0, 6/10/16/25/35/50 mm

SC6-6(10PCS);SC6-8(10PCS);SC10-6(10PCS);SC10-8(10PCS);SC16-6(5PCS);SC16-8(5PCS);SC25-6(5PCS);SC25-8(5PCS)

step 1

Cut and strip the wire of what you want to crimp

step 2

Press the spring die on both sides, rotate the gear to the correct size for the cable and release the spring to lock

step 3

Select the appropriate terminal, then place it in the wire and press firmly

step 4

If it leaves a ridge, simply rotate the connector 90 degrees and crimp it again, which will make the connection tighter