The GOOFIT motorcycle fuel line kit includes a transparent fuel filter and a retaining spring. Length: 100 cm. Specifications: Outer diameter 8 mm / Inner diameter 4 mm.

Key Product Benefits

Complete Solution: This product is a complete fuel line upgrade kit, consisting of a 100 cm fuel hose, a transparent fuel filter, and a mounting clamp.

No separate purchases are required, saving you time and effort.

Precise Specifications of the Transparent Fuel Hose: The fuel hose has an outer diameter of 8 mm and an inner diameter of 4 mm – one of the most common specifications in the motorcycle and ATV industry.

The transparent material allows for easy observation of fuel flow.

Integrated Visible Fuel Filter: The included transparent fuel filter effectively traps contaminants and allows for easy monitoring of the contamination level.

This facilitates regular maintenance and protects the carburetor and fuel pump. Robust mounting clamp: A stainless steel mounting clamp (hose clamp) ensures a secure connection between the fuel line and filter, tank switch and carburetor, and prevents loosening or leakage due to impacts. Important installation and compatibility notes: Specification check (prerequisite for installation): Inner diameter measurement: Please measure the outer diameter and connector diameter of your vehicle's original fuel line to ensure it meets the original specifications. This product has an inner diameter of 4 mm and is compatible with most connectors. Length: A length of 100 cm is sufficient for wiring from the fuel tank to the carburetor on most models. Please plan the routing before installation to avoid lines that are too long or too short. Correct installation sequence and direction: Fuel filter direction: The transparent filter housing is marked with arrows indicating the flow direction. The "IN" end (fuel inlet) must be connected to the fuel tank in the direction of fuel flow, and the "OUT" end (fuel outlet) must be connected to the carburetor. Do not install backwards. Shortening the fuel line: If necessary, use sharp scissors to cut the fuel line vertically and ensure a clean cut for connection to the connector. Fuel installation and safety: Safety precautions: Always shut off the fuel supply before use, remove any residual fuel from the lines, and work in a well-ventilated area away from open flames. Secure connection: Fully insert the fuel line into the connections on the fuel inlet valve, filter, and carburetor, and then tighten it with the appropriate locking screw at the rear end of the connection. This is important to prevent the fuel line from loosening due to vehicle vibrations. Leak test: After installation, open the fuel valve and carefully check all connections (4 to 6 in total) for leaks. Do not start the engine until you have made sure that there are no leaks.