The OBD II ELM327 WIFI car diagnostic tool is compatible with Android and Apple systems and uses a PIC25K80 chip as well as Bluetooth for wireless reading and clearing of fault codes.

Mini OBD2 Wi-Fi scanner for various makes with CAN bus compatibility, comparable to the ELM327 Wi-Fi. Supports all OBD2 protocols and is compatible with iOS, Android, Symbian, and Windows. Reads generic and manufacturer-specific fault codes and displays their meaning (over 3,000 generic code definitions in the database). 5 good reasons for the Mini OBD2 Wi-Fi Scanner: 1. Software version: V2.1 (software dependent) 2. Hardware version: V1.5 3. Compatible with all OBD-II compliant vehicles 4. Wireless (Wi-Fi) 5. Compatible with four operating systems (iOS, Android, Symbian, Windows) Supported protocols: 1. SAE J1850 PWM (41.6 kbaud) 2. SAE J1850 VPW (10.4 kbaud) 3. ISO9141-2 (5 baud initialization, 10.4 kbaud) 4. ISO14230-4 KWP (5 baud initialization, 10.4 kbaud) 5. ISO14230-4 KWP (fast initialization, 10.4 kbaud) 6. ISO15765-4 CAN (11-bit ID, 500 kbaud) 7. ISO15765-4 CAN (29-bit ID, 500 kBaud) 8. ISO15765-4 CAN (11-bit ID, 250 kBaud) 9. ISO15765-4 CAN (29-bit ID, 250 kBaud) Mini OBD2 WLAN Scanner Functions: 1. Reading generic and manufacturer-specific diagnostic codes and displaying their meaning (over 3,000 generic code definitions in the database). 2. Clearing fault codes and turning off the check engine light (MIL). 3: Real-time display of sensor data, including: 4: Engine speed 5: Calculated engine load 6: Coolant temperature 7: Fuel system status 8: Vehicle speed 9: Short-term fuel correction 10: Long-term fuel correction 11: Intake manifold pressure 12: Ignition timing 13: Intake air temperature 14: Airflow 15: Absolute throttle position 16: Oxygen sensor voltages / associated short-term fuel corrections 17: Fuel system status 18: Fuel pressure 19: And much more. Mini OBD2 WiFi Scanner Specifications: SSID: WiFi_OBDII IP: 192.168.0.10 Port: 35000 Communication: WiFi Master Chip: ST Compatible Systems: iOS, Android, Symbian, Windows. Operating Voltage: 9V ~ 16V. Operating Current: 65mA. Standby Current: 45mA. Operating temperature: -40 °C to 85 °C. Relative humidity: below 60%. Dimensions: 45 mm × 25 mm × 75 mm. Compatible systems: Software platforms: Windows XP, Windows 7/8, iOS, Android, Symbian. Compatible software: Windows: ScanMaster-ELM, ScanTool.net, PCMSCAN ELM, etc. iOS: Auto Doctor, Mini OBDII. Android: Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBD, EOBD, etc. Symbian: OBDScope. Package contents: 1 Mini OBD2 Wi-Fi scanner, 1 box.