The oxygen sensor 18213-74P10 is suitable for the front/rear oxygen sensors (1821374P10) of the Suzuki Swift SX4, Vitara, Jimny Landy etc.--BIEMMEDUE

Product Name: Lambda Sensor (O2 Sensor) Original Part Number: 18213-74P10 / 1821374P10 Compatible Brand: Suzuki Compatible Models: Swift, SX4, Vitara, Jimny, Land Rover, Liana and many other Suzuki models (please refer to the original part number for the corresponding model year and engine size). Sensor Type: Front Lambda Sensor / Rear Lambda Sensor (please select according to the installation location on your vehicle. Some models use both front and rear lambda sensors; it is recommended to check the original part number). Product Features: Precise Signal: Uses high-quality zirconium oxide ceramic elements for a fast response to changes in engine operating conditions, accurately monitors the oxygen content of the exhaust gases, and provides the ECU with accurate feedback on the air-fuel ratio to ensure optimal engine performance. Direct replacement with original dimensions: Conforming to original specifications, thread size, wiring harness length, and connector are identical to the original vehicle, so no modifications are required; direct installation saves time and effort. Durable material: The outer casing is made of corrosion-resistant, high-temperature-resistant, and oxidation-resistant stainless steel, making it suitable for demanding exhaust environments. The internal heating element heats up quickly, reducing cold start time and emissions. Reliable performance: Rigorous factory testing ensures stable and reliable operation, extending the lifespan of the three-way catalytic converter, contributing to reduced fuel consumption and emissions, and simplifying annual vehicle inspections. Economical and affordable: This catalytic converter offers a high-quality alternative to the original part at a lower price and is the ideal choice for maintenance and repairs. Installation instructions: Please check the part number of your vehicle's original oxygen sensor before installation. The corresponding part numbers for this product are 18213-74P10 / 1821374P10. Installation by a qualified technician is recommended. Apply anti-seize paste to the threads (some products are pre-coated) and tighten to the specified torque to prevent damage. After installation, it is recommended to clear any existing engine fault codes and perform a test drive to allow the engine control unit (ECU) to recalibrate.