The thermostat temperature rises quickly and remains constant for a long time. The digital controller is widely used for home displaying blue screens.

Features:

1. Good performance; the thermostat temperature rises quickly and is maintained at a constant temperature for an extended period.
2. The PCB uses a 1.6mm thick double-sided board with 2.0 oz copper plating and a full tinning process to ensure good performance in handling both large and small currents.
3. Widely used; this thermostat can be used in various incubation setups.
4. High precision; the temperature control accuracy is 0.1℃, and the thermostat switch temperature control range is -50 to 110℃.
5. If you encounter any problems during use, please contact us promptly; we will be happy to assist you.

Specifications:

Item Type: Thermostat
Material: PCB
Model: XH-W1308
Temperature Control Range: -50-110 ℃
Temperature Control Accuracy: 0.1 ℃
Display Color: Red/Blue (Optional)
Power Supply Voltage: 12V
Temperature Measuring Probe: NTC10K / B3950 / L1 Meter
Output Type: Relay Output, Maximum Capacity 10A
Environmental Requirements: -30~60℃, Humidity 20%~85%

How to Use:

Determine the Working Mode: Press and hold SET for approximately 3 seconds to display P0, then press SET to change the P0 value. H is heating mode, C is cooling mode. 2. Set the Hysteresis: The return difference corresponds to the amount to be returned after stopping and restarting the set temperature. The default value is 2. If you wish to change it, please press and hold SET to enter P1 to modify. 3. Set the Stop Temperature: After setting the mode and hysteresis, press ENT to confirm and return. At this point, the screen displays the real-time temperature. Press SET once; the screen will flash. Press + to adjust the temperature until it stops.

Package List:

1 x Thermostat 2 x Screws 1 x Sensor 1 x Panel 1 x Adhesive Pads

Note:

Do not use outside the voltage and current range.