Thermostatic Plug with 3 Meter Probe 220V, Digital Temperature Controller with LCD Backlight, Temperature Controller for Incubator, Refrigerator, Greenhouse

Plug and play design, LCD screen with wide viewing angle and backlight for easy temperature reading in low-visibility conditions and from various viewing angles. Press any key to turn on the backlight, press the DOWN key to turn it off. The backlight can be set to last 10 minutes, 1 hour, 4 hours, 8 hours, or always on.

Wide temperature control range. Plug the device into the KT3100BL Thermostat Plug, set the start and stop temperatures, and the KT3100BL will automatically switch between heating and cooling modes and control the device to operate as programmed. Temperature control range: -40℃~120℃/-40℉~248℉.

Timer and countdown function.

In addition to temperature control mode, the KT3100BL Thermostat Plug has four other modes: F01 cycle timer mode, F02 countdown ON mode, F03 countdown OFF mode, and F04 countdown ON and OFF mode. Setting range: 0–99 hours 59 minutes. Please note that it is not possible to use both modes simultaneously. Other features you'll appreciate include: a 3-meter NTC temperature probe, temperature calibration, reset function, and all settings are saved when the device is powered off. You can press and hold the "SET" button to switch between Celsius and Fahrenheit. This KT3100BL Temperature Controller Plug is suitable for greenhouses, reptile enclosures, incubators, terrariums, freezers, refrigerators, heaters, fridges, homebrew facilities, vivariums, fermentation tanks, heating mats, and other temperature control systems. It can also be used as a timer for cycles and countdowns. Power supply: 100~250V AC; Output: Max 16A/230V.