Three-Cup Wind Speed ​​Detector 0-5V, 360 Degree Wind Speed ​​Measurement Aluminum Alloy

1. The high-quality aviation cable connector configuration, with superior corrosion and erosion resistance, ensures long-term use.
2. Lightweight, reducing friction, improving sensitivity, and ensuring measurement accuracy.
3. Three-cup design for 360-degree wind speed measurement, low power consumption, stable performance, and high efficiency.
4. Polycarbonate material, with acid and alkali resistance, oxidation resistance, and other characteristics, significantly extends service life.
5. The surface is treated by electroplating and spraying, providing corrosion and ingress resistance, and will not rust over time.
6. Four-conductor waterproof cable, black shielded cable, waterproof, oil-resistant, with anti-interference capability and stable signal transmission.
7. With a moisture-proof and corrosion-resistant aluminum alloy casing, high-precision measurement, and a wide measurement range, it is a special meteorological measuring tool.
8. It can be widely used in wind speed measurement for power plants, wind speed and direction measurement for weather monitoring, wind speed and direction measurement for navigation and aviation, and intelligent wind speed and direction measurement for agriculture.

Specification:

Condition: 100% Brand New
Item Type: Wind Sensor
Material: Aluminum Alloy, Polycarbonate
Output Voltage: 0-5V
Wind Speed ​​Measurement Range: 0-30m/s
Wind Speed ​​Measurement Accuracy: +1 m/s
Response Time: Baud Rate: 2400/4800/9600
Power Consumption: Operating Temperature: -30 - 80°C
Weight: approx. 518g / 18.3oz
Height: approx. 12.4cm / 4.9in
Wiring instructions:
Brown: Positive power supply (12-24V)
Black: Negative power supply
Yellow: 485-A
Blue: 485-B
Application: Power plant wind speed measurement, weather monitoring wind speed and direction measurement, navigation and aviation wind speed and direction measurement, intelligent agricultural wind speed and direction measurement
Installation method:
1. Ensure the mounting bracket is parallel to the ground;
2. Install with the flange and secure with a bolt to the bracket;
3. Connect the air intake connector to the sensor's air intake through the designated air passage hole.

Package List:

1 x Wind Sensor, 1 x Cable, 1 x Bag of Screws

Note:

1. Please allow a 0-1 inch error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same way, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Please note that the new and old types of this product will be sent randomly, and please make sure you do not mind this before ordering.