Three-phase vector frequency inverter, 340-440 V input, 0-440 V output, 0.75 kW, 2.5 A

Features:1. Reliable Operation: All internal components use SMD design, which significantly increases the frequency inverter's stability.
2. Easy to Use: The clear control panel and digital display provide excellent visibility and convenient control.
3. Fast Cooling: The extra-large heat sink is also equipped with a low-noise cooling fan, ensuring rapid heat dissipation.
4. Good Material: Made from flame-retardant ABS material, this frequency inverter is highly impact-resistant.
5. Safer operation: The high-end motherboard provides good protection and high safety for the 340-440V three-phase input and 0-440V output.
Specifications:Item Type: Frequency Inverter
Material: ABS
Storage Temperature: -25℃~+55℃
Input Voltage: Three-phase 340-440V AC.Output Voltage: Three-phase 0-440V AC.

Package List:1 x Frequency Inverter1 x User Manual
Note:1.Before wiring, please confirm that the input power is off.2.For wiring work, please have it done by professional electrical engineers.The grounding terminal must be grounded.4.Once the emergency stop circuit wiring is complete, be sure to verify that the action is valid.5.Do not connect the inverter output wire to the casing and do not short-circuit the output wire.6.Please confirm that the AC main supply voltage is consistent with the inverter's rated voltage.7.Do not perform a withstand voltage test on the inverter.8.Please connect the braking resistor according to the wiring diagram.Do not connect the power cord to the U, V, or W output terminals.Do not connect the contactor to the output circuit.Be sure to install the protective cover before powering on.When removing the cover, be sure to disconnect the power supply. 12.The inverter that selects the reset and retry function must not be near mechanical equipment, as it will suddenly restart when the alarm stops.13.After confirming that the operating signal is broken, the alarm can be reset.If the alarm is reset while the signal is active, the inverter may start suddenly.14.Do not touch the inverter terminals as there is high voltage on the terminals, which is very dangerous.15.During power-up, do not change the wiring or disassemble the terminal.Disconnect the main circuit power before performing inspection and maintenance.17.Do not modify the inverter without authorization.18.Please note