Tile drill bit kit, diamond drill bit for drilling porcelain stoneware (5, 6, 8, 10, 12 mm), metal drill bit (6 mm tiles), ceramic drill bit (glass, granite, marble, quartz, material

【Various diameters】In addition to the 5, 6, 8, 10 and 12 mm tile drill bits, you will also receive a 6 mm carbide drill bit. This saves you the hassle of drilling with a diamond drill bit and allows you to drill holes even more precisely and easily.

【Unique design for dry drilling】The wax inside ensures cooling. Our diamond tipped drill bits feature built-in wax cores that automatically absorb and dissipate heat during drilling. Dry drilling produces no water and reduces pollution.

【Multiple uses】Porcelain tile drill bit, ideal for drilling clean holes in hard materials such as tile, porcelain, granite, ceramic, glass, mirror, stone and brick.Note: Not suitable for wood, metal or plastic.

【Compatible Round Bars】The glass drill bits are designed with a round shank and are compatible with most machines such as hand drills, angle grinders and bench drills. The side grooves facilitate the evacuation of debris and allow smooth and rapid drilling. Depth marking is also useful for some projects.

【High quality materials】The drill body, with diamond vacuum brazing technology, provides very high efficiency, increased cutting speed and extended life.

6-piece dry diamond drill bit set: 5, 6, 8, 10, 12mm and 6mm carbide bits. Ideal for drilling clean holes in hard materials.

High quality diamond grain, resistant to high temperatures, for efficient drilling.Filled with cooling wax, suitable for dry drilling.

No cooling is necessary during drilling thanks to the cooling wax integrated into the drill bits. However, it can extend the life of the drill bits.

How to use it?

1. Install the drill bit on the hand drill.

2. Maintain a high speed and tilt the drill 45° throughout the process to maintain the half-moon groove.

3. After drilling the positioning groove, place the drill vertically, shake it slowly in one direction and drill.

4.Drilling completed.

It is important to use a slight rotating motion when drilling!

This ensures optimal drilling results.

Note

Prohibited materials: cement, metal, tempered glass, wood, plastic, etc.

When using a cordless screwdriver, make sure the speed is higher than 1600 RPM.

When using a hand drill, make sure the speed is above 2000-3000 RPM.

5/6/8/10/12mm Dry Diamond Drill Bit Set

6mm Carbide Drill Bit

Drilling Depth: ≤ 35 mm

Length: 65 mm

-Contact our customer service in case you need further assistance