Tile leveling system, auxiliary tool for positioning and leveling tiles, 151 pieces

Horizontal Wedge Tile Spacer Kit for Floor and Wall Tile Leveling Systems, Leveling Positioner with Wrench

Manual Construction Tools Features:

Wear-resistant and reusable.

Easy to use and suitable for DIY projects.

Keeps tiles balanced and level.

Increases tile installation speed.

Reduces installer fatigue/stress.

Flat, virtually lip-free surface.

Reduces the need for grinding and polishing.

Prevents tiles from shifting during curing.

Specifications: Material: PP + Stainless Steel

Applicable Spacers: 2mm-8mm/0.08-0.31 inches Tile Thickness:

5 mm-20 mm/0.2-0.79 inches. Comes with 3 packs of tile leveling crosses of different specifications, suitable for more different occasions: Leveling Cross:

Specifications: 1.0 mm/0.04 inch, thickness 2.5 mm/0.1 inch, length 22 mm/0.87 inch, scope of application: seamless tiles, polished tiles

Leveling Cross: specification 2.0 mm/0.08 inch, thickness 2.5 mm/0.1 inch, length 22 mm/0.87 inch, scope of application: wall tiles, ceramic tiles

Leveling Cross: specification 3.0 mm/0.12 inch, thickness 2.5 mm/0.1 inch, length 23 mm/0.91 inch, scope of application: antique bricks, exterior bricks

Use suggestions:

1. 1. Lay the first tile, leaving an appropriate gap (used with cross spacers). 2. Insert the T-shaped pin along the gap between the tiles. 3. Then rotate it 180 degrees so the T-shaped pin is wedged at the bottom of both tiles. 4. Adjust the cover with your hand/special wrench until both tiles are level. 5. Approximately 4 to 6 hours after leveling, before the cement/adhesive is completely dry, rotate the cover upside down and remove the T-shaped pin 180° until the tile is removed. Note: Due to different monitors and lighting effects, the actual color of the item may be slightly different from the color shown in the picture. Thank you!

Please allow for a measurement deviation of 1 to 3 mm due to manual measurement.