Tile Leveling System, Tile Positioning and Leveling Auxiliary Tool, 151Pcs

General description Tile Leveling System is an essential tool for achieving perfectly aligned tiles during installation. This 151-piece kit includes horizontal wedge tile spacers designed for both floor and wall tile leveling. It is wear-resistant, reusable, and easy to use, making it suitable for DIY projects. The system helps keep tiles balanced at the same level, increases installation speed, and reduces installer fatigue while preventing tiles from moving during curing. Technical specifications Material: PP + stainless steel Applicable spacers: 2mm-8mm / 0.08-0.31in Tile thickness: 5mm-20mm / 0.2-0.79in Leveling cross specifications: 1.0mm / 0.04in (thickness 2.5mm / 0.1in, length 22mm / 0.87in) for seamless and polished tiles Leveling cross specifications: 2.0mm / 0.08in (thickness 2.5mm / 0.1in, length 22mm / 0.87in) for wall and ceramic tiles Leveling cross specifications: 3.0mm / 0.12in (thickness 2.5mm / 0.1in, length 23mm / 0.91in) for antique and exterior bricks Installation Lay the first tile, leaving a proper distance (used with cross spacers). Insert the T-shaped pin along the gap between the tiles. Rotate 180 degrees to secure the T-shaped needle at the bottom of the two tiles. Adjust the cover with your hand or a special wrench until the tiles are level. After 4-6 hours, before the cement/adhesive is completely dry, rotate the cover upside down and pull out the T-shaped pin 180°. Usage This tile leveling system is designed to streamline the tile installation process, ensuring that tiles remain in place and level during the curing phase. It is particularly useful for both professional installers and DIY enthusiasts looking to achieve a flawless finish. Other information Please allow 1-3mm measuring deviation due to manual measurement. Due to different monitor and light effects, the actual color of the item might be slightly different from the color shown in the pictures.