Toilet Paper Holder, Adhesive Stainless Steel, for Kitchen Bathroom - 2..

[Fixed Installation] Two mounting methods: self-adhesive toilet paper holder can be installed without drilling. With pre-drilled holes, the holder can be permanently fixed to the wall for a secure and stable hold. High Load Capacity: Firm grip and waterproof design, more stable and durable, easily holding 8-10 kg. Material: Brushed stainless steel toilet paper holder. The use of high-quality stainless steel significantly reduces the appearance of scratches, corrosion, rust, and fingerprints. [Wide Compatibility] The modern and discreet design is very suitable for use in bedrooms, bathrooms, and toilets, and accommodates various types of toilet paper rolls. It is most suitable for ceramic tiles, wood, plastic, and glass. [Note] The toilet paper holder is not suitable for limestone walls, wallpaper, or whitewashed walls. Allow 24 hours for optimal adhesion. Is installation complicated? Is the wall damaged? Residual residue? Don't worry, this towel holder can solve your problem. 【Features】 - Clean and dry the wall, peel off the adhesive film, press the toilet paper holder onto the wall for 30 seconds, then wait 24 hours, and then hang it up. - Self-adhesive toilet paper holder, which can be fixed without drilling holes. No surface damage. - Can be removed without leaving any residue. 【Product Information】 - Dimensions: 16.5 x 10 x 7 cm. - Material: Stainless steel - Surface: Brushed - Mounting: Ultra-strong 3M adhesive tape [Installation Steps] - Clean the adhesive surface. The installation surface must be free of dust, grease, and wax. - Before installation, mark the desired position of the product on the adhesive surface. - Remove the protective film from the 3M adhesive. -Attach the product to the marked adhesive surface and press for approximately 2 seconds. Do not move the product after 5 to 8 seconds of attachment. -Please wait at least 24 hours before using. [Package Contents: -1 x Toilet Paper Holder] [Note] -The self-adhesive toilet paper holder can only be used on smooth surfaces, such as glass, wood, tiles, mirrors, cooktops, smooth metal surfaces, etc. Do not use on finely broken or rough surfaces, such as walls. If hooks are used on such walls, they will loosen. Thank you for your understanding.