Toothbrush holder with 4 slots, UV drying and sterilizing function, 3 operating modes, 3000 mAh battery, wall mount

ELEGANT DESIGN This holder is made of quality materials, with rounded corners and edges, and a smooth surface. In addition to its primary functions of drying and sterilizing, this holder helps you keep your sink countertop tidy, giving your bathroom a modern look. The hanging holes are compatible with 99% of electric and manual toothbrushes, including Oral-B.

OPERATING MODES It is designed with 3 operating modes: MOD 1 – 180s UV sterilization only, MOD 2 – 480s drying with ventilation followed by 180s UV sterilization, MOD 3 – 780s drying with alternating heating and ventilation, and finally 180s UV sterilization. This sterilizer also has an automatic function, so once every 8 hours, it automatically sterilizes the brushes, ensuring your family always has clean and sterilized brushes.

If you wish to close it, you can press the stop button for 3 seconds.

EFFECTIVE AND SAFE The holder uses 4 UV lamps with 99.9% efficiency and a rapid 180-second sterilization time. The lamps have a lifespan of 3000 hours, or approximately 60,000 sterilizations. The sterilizer's UV light turns off when you lift the cover to protect your eyes and skin. Overheating technology prevents damage to toothbrushes.

INTEGRATED RECHARGEABLE BATTERY If you use MODE 1 (sterilization only), the device can remain charged for approximately 30 days until the next charge. A fully charged battery lasts for 8 complete drying and sterilization cycles (MOD 3). This mode is power-intensive, after which the holder requires connection to the charger.

!!! Tip: If you wish to use MODULE 3 for an extended period, please connect the charger to an output current greater than 2A. If the output current is less than 2A, the device will not be able to switch to heating mode. EASY INSTALLATION The device is very easy to install on bathroom tiles, without the need for drilling into the wall. It comes with a strong adhesive sticker that won't damage the walls. The mounting plate also has holes in case the wall is uneven and the adhesive sticker is ineffective, so it can be installed with screws. TIP: After installing the device, please wait at least 24 hours before hanging your toothbrushes. FEATURES: UV drying and sterilization, High-quality materials, 99% compatibility, Compatible with Oral-B, 3 operating modes, Automatic sterilization function, 99.99% sterilization efficiency, Lamp lifespan of 60,000 sterilizations, Overheating technology, Built-in rechargeable battery, Easy installation, 2 installation methods (adhesive sticker or screws)