Transfer Switch Automatic Transfer Switch - 1 pc 220V 63A 2P Mini Circuit Breaker Automatic Transfer Switch Dual Power

Frame Current: 63A Rated Current: 63 A Number of Poles: 2 Breaking Capacity: 6kA ATS Level: CB Level Product Type: Transfer Switch Product Series: Automatic Dual-Power Transfer Switch Controller Type: Motor Rated Voltage: 230V Wiring Method: Top and Bottom Dimensions: 150*138 Installation Method: Mounting by screw Installation size: 118*128 Weight: 1.5 kg Electrical life: 2000 Mechanical life: 1000 3C rated voltage range: 50 V above 440 V and below Operating frequency: 50 Hz/60 Hz Rated voltage: AC400V Operating voltage: AC220V Display function: LED display Product size: 150 mm x 138 mm x 115 mm Operating mode: automatic and manual

Conversion time: ≤2S

Usage level: AC - 33iB

Conversion method: auto-inversion and auto-recovery

Product description:

Dual power automatic switch is to switch two power sources, divided into common power and emergency power. When the common power is cut off, the emergency power will supply power and The common power supply will return to the usual power supply after power on. principle), if there is no need for automatic switching under special circumstances, you can also set it to automatic switching manual (this model can be used for both manual/automatic, arbitrary adjustment)

Additional Note: The backup power supply should only be switched to the backup power supply in the event of a common power outage when there is power available. Currently, this model is widely used in 220V AC circuits. The common power supply is the mains power, and the backup power supply can be solar power, street light power, battery power, or any 220V AC power supply, and vice versa! (Note: The common/backup power supply must be a 220V AC power supply. If it is a DC or low-voltage power supply, the inverter must be converted to 220V AC.