Transparent Baby Table Corner Protector, 3M Extra Strong Pre-Adhesive Nano Tape, Baby Table and Furniture Protection, Edge Protector

Highly Transparent: Our baby corner protectors are completely transparent to preserve the original look of your furniture. With a protective edge layer, they won't tear easily. Traceless Removal: Easy to remove without damaging your furniture. Heat with a hairdryer before removing, then tear slowly. High Adhesion: The material of our table edge protector has been improved so that it adheres better and stays on furniture longer, and won't peel off easily. Free Cutting: You can cut the bumper to the length you need, making it easy to use. Steps: 1. Clean the corners of the table and remove any stains from the surface. 2. Remove the bumper strip and place it in the correct position. 3. Secure the bumper strip firmly and smooth any unevenness with your hands. Tips: 1. Installation Tips: 1. Please clean the installation area of dust, water stains, and other impurities before installation. After installation, it is recommended to wait 24 hours for optimal adhesion. 2. Gluing Tips: Please mark the area before installation to avoid re-gluing. Please do not touch the area with your hands to avoid damaging the adhesive! 3. Removal: You can use a hairdryer to slowly loosen the glue in the heat area. Once any glue residue is present, wipe it clean with a warm towel and detergent. 4. About Odor: We prefer materials without an irritating odor. A slight odor may develop during transport; after a few hours of airing, it will dissipate.