Transparent Car Shock Absorber Mount, 2 Pieces, TPE Spring Buffer, Power Cushion, Type B+

General Description

The car shock absorber mount is designed to improve stability and driving comfort. Made of transparent TPE, this spring pad effectively reduces body vibrations and absorbs suspension noise. It also addresses the issue of weak springs by raising the body by 0.2 to 0.3 cm, while protecting the chassis and increasing load capacity. This product extends the life of the shock absorber and improves braking efficiency.

Technical Specifications

• Material: TPE
• Color: Transparent
• Package Weight: Approx. 1658 g (A+), 1300 g (A), 719 g (B+), 806 g (B), 711 g (C), 383 g (D), 321 g (E), 386 g (F)

Installation

• It is recommended to have the product installed by a specialist shop. Before installation, park the car on level ground and prepare some adhesive, a jack, and soapy water.
• Use a jack to lift the car body to facilitate installation. The suspension spring should be visible without needing to lift too high.
• Clean the spring with soapy water and lubricate the rubber buffer to facilitate installation.
• Install the rubber buffer in the middle of the spring and check that the spring is correctly inserted into the grooves in the rubber.

Use

• Regularly check that the spring is correctly inserted into the upper and lower grooves of the rubber buffer.
• After a few days, check if the upholstery adhesive is still suitable.
• When lifting the body for repairs, make sure that the spring does not come out of the rubber slot in the buffer.

Other Information

• Package List: 2 * Shock Absorbers
• Please allow 1-3cm error due to manual measurement.
• The colors shown may slightly differ from the actual item.

due to monitor calibrations.