REF KWJ700SME18142038

Trend KWJ700S 700mm Multi- Material Square Edge Kitchen Worktop Jig

Product out of stock
Product out of stock
Product details

Trend KWJ700S 700mm Multi- Material Square Edge Kitchen Worktop Jig


Quick and easy set up.
Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Use on composite square edge, laminate and solid wood worktops.
For square edge and small radius edge worktops to produce a neater joint.
For standard radius edge postform laminate worktops.
Preset kitchen worktop widths for ease of set up.
Left and right hand joints for most kitchen layouts.
Precise fit ABS plastic location pins for accuracy.
10mm offset cut for composite, solid wood and square edge worktop.
35mm offset cut for standard laminate postform worktop.
Preset for worktop widths 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm, 650mm and 700mm.
35mm hinge recess facility
Three open ended dog bone style bolt recess
Radius curves at 40mm, 100mm and 400mm.
45 degree end cut.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter ref. GB30.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.

Product Specification:

Barcode: 5027654062456
Part Number: KWJ700S
Length: 985 mm
Width: 390 mm
Thickness: 12 mm
End cut: 45 degrees
Corner Radius: 40 mm
Corner Radius: 100 mm
Corner Radius: 400 mm
Female cut material width loss (inset): 10mm and 35 mm
Jig Requirements :
Guide bush: 30 mm
Plunge router: 1/2-inch (min. 1300 watts)
Cutter: 12.7 mm x 50 mm cut
Clamps: Two

**images for illustrative purposes only – please refer to description and specification for full details of product**