Ulisem Self-Adhesive Waterproof PE Wall Sealing Strip, Decorative Sealant for Kitchen, Bathroom, Shower, Toilet, Wall Corner 3.2 x 3.8 cm

Describe Intelligent Thermostat: Temperature control range: -40°C-120°C, temperature control accuracy: ±1%. The thermostat plug can automatically switch between heating and cooling modes and control heating/cooling during operation by setting the equipment's start and stop temperature. Multiple Functions: The LCD screen can display the temperature control mode and 4 timing modes F01-F04. It also has a temperature correction function, a screen lock protection, and a memory function (all current settings are saved after power-off). Intelligent Time Control: This thermostat plug can detect the temperature, set the temperature via the switch, and features cycle time control, a timer switch, and a timer switch function. Time range: 0-99 hours and 59 minutes, time accuracy: up to 10 minutes. Maximum load: 16A(2), 3680W. 1.8m temperature probe: The thermostat plug comes with a 1.8m cable temperature probe, which is used to connect the measuring point, and the temperature detection range is -40 ~ +120℃. Multiple uses: The digital temperature controller plug can intelligently control temperature and time. Widely used in greenhouses, aquariums, carbon crystal heaters, thermostatic switches, portable air conditioners, intelligent aquaculture control, and other home wall heaters and other places. Specification: 1. Rated voltage: 230VAC 50HZ 2. Rated load: MAX 16A 3680W 3. Temperature range: -40~120℃ 4. Temperature control error: ±1% 5. Temperature display resolution: 0.1°C 6. Synchronization error: MAX 10 minutes. F01: Cycle synchronization mode. Press the "MODE" button to switch to F01. Press the "SET" button to set the ON (start hour/minute) and OFF (stop hour/minute) values. ON is the system operating time, OFF is the system off time. This mode is the cycle time, which can control the intermittent operation of the system. F02: Activate synchronization mode. Press the "MODE" button to switch to F02. Press the "SET" button and set the hours/minutes. In this mode, the system is controlled to operate at the specified time. For example, if CD ON is set to 30 minutes, the countdown starts and the system starts automatically after 30 minutes. F03: Synchronization mode. Press the "MODE" button to switch to F03. Press the "SET" button and set the hours/minutes. In this mode, the system is controlled to stop at the specified time. For example, if you set CD OFF to 30 minutes, a countdown will start and the system will automatically stop after 30 minutes. F04: Timer On/Off Mode. Press the "MODE" button to switch to F04. Press the "SET" button and set the CD ON (hour/minute) and CD OFF (hour/minute) values. In this mode, the system is controlled to start and stop at set times. For example, if you set CD ON to 30 minutes and CD OFF to 40 minutes, the system will start operating after 30 minutes and stop after 40 minutes. Shipping Quantity: 1 piece. Key Points: 1. Product size is measured manually; there may be errors. 2. Since different monitors display colors differently, please refer to the actual color you received. 3. Please confirm the size before purchasing. 4. After receiving the package, if you are dissatisfied, please contact me first; do not leave a negative review easily. Thank you, and I wish you happiness and prosperity.