Underground cable detector, cable tester, with headphones for locating wires and cables

[Earth Locator Application] The wire detector uses an advanced frequency generator to produce an audible alarm at the end of the signal. The closer the distance, the louder the tone. In noisy environments, you can use external headphones for voice recognition, or the adapter to locate other metallic cables. The transmitter has a DC level test function, the level of which can be assessed by the brightness of the status indicator: the brighter the light, the higher the level; the dimmer the light, the lower the level.

Wire Detector Range: Up to 60 cm deep and 1000 meters long. Power Supply: 9V alkaline battery. Network Cable Length: Up to 1 km.

Usage: Attach the red clamp to the cable to be tested and the black clamp to the ground.

[Sound Level Adjustment] The high-sensitivity sound level adjustment and headphone reception are more convenient and comfortable.

[Note] Do not use on live circuits to avoid damaging the tester! This device is primarily used to locate de-energized cables or low-voltage cables below 24V. The F02 wire locator is only suitable for single-core or double-core wires, not for multi-core or bundled wires.