Universal brushcutter head M10 x 1.25 – Left-hand thread – 2.4 mm nylon cutting line – Automatic feed

General Description

This universal replacement trimmer head is designed to be compatible with most straight-shaft trimmers equipped with an M10 x 1.25 left-hand thread. Please check the screw size on your trimmer to ensure proper compatibility. The trimmer head comes pre-installed with a heavy-duty 2.4 mm (0.095 inch) diameter nylon trimmer line, approximately 2 meters long. This spool head features an automatic line feed function, allowing a section of the trimmer line to be automatically advanced by tapping the ground while the trimmer is running.

Technical Specifications

• Thread: M10 x 1.25 mm

• Thread Type: Left-hand thread

• Trimmer Line Diameter: 2.4 mm (0.095 inch)

• Trimmer Line Length: Approximately 2 meters

Installation

To install the trimmer line, simply insert the line into the holes on both sides and turn the knob clockwise to secure it. No need to disassemble anything.

Operation:

This cutting head is very simple to use. During operation, simply tap the ground to automatically extend the cutting line.

Other information