Universal garage door remote control, 433.92 MHz frequency

DescriptionCompatibility: This remote control replica is compatible with the following series: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200/HCS201 (some codes), HCS300/HCS301 (some codes), and some microcontrollers. Copying Procedure: Place the remote control to be copied and the original remote control side-by-side on a table and press the copy button on each. When the LED indicator flashes three times rapidly, the copy is successful. The procedure is the same for the other buttons. If copying fails, clear the code and try again. (Note: This universal remote can only copy the original remote with the same frequency and functionality.) Code clearing procedure: Press and hold buttons "A" and "B" simultaneously. The LED indicator will flash three times. Release button "B". If you do not release button "A", press the released button "B" three times. The LED indicator will flash rapidly. Once the data is cleared, the LED indicator will turn off, regardless of which button is pressed. Stable signal and fast response: This universal garage door remote uses a smart chip and wireless radio frequency technology for long-range, non-directional transmission. Notes: 1. A 1-3 mm error margin may occur due to manual measurement. Thank you for your understanding. 2. The colors shown in the photos may differ slightly from the actual product, as monitors are not calibrated the same way. Please refer to the actual product.