Universal garage door remote control, 433.92 MHz frequency

Compatibility: This remote control replica works with the 2260 series (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, 527 (all manufacturers), 1527 series (all manufacturers), 2240 series (all manufacturers), HCS101, HCS200/HCS201 series (some codes), HCS300/HCS301 series (some codes) and some microcontrollers. Copying Method: Place the remote control to be copied and the original remote side-by-side on the desk, and press the copy button on each. When the LED flashes three times rapidly, the copy has been successful. The operating method for the other buttons is the same. If the copy fails, please erase the code and copy again. (Note: This universal remote control can only copy the original remote control with the same frequency and function correctly.)

How to erase the code: Press and hold the "A" button and the "B" button simultaneously. The LED indicator will flash three times. Release the pressed "B" button. If the "A" button is not released, click the released "B" button three times. The LED indicator will enter a rapidly flashing state. After erasing the data, regardless of which button is pressed on the remote, the LED indicator will not light up.

Stable signal and fast response: This universal garage door remote uses a smart chip and wireless radio frequency technology to support long-distance, non-directional transmission.