Universal garage door remote control, wireless key electric door remote control, 433M garage door access key remote control

Describe

Function:

Compact design and beautiful appearance; 4-button control.

Thanks to radio frequency technology, the transmission distance is long, non-directional, with high transmission sensitivity and no signal blocking.

The four buttons can respectively replicate four different types of chips, meaning one remote control can operate four different types of devices.

433 MHz, transmission distance 50-100 m (open space), offering you a new remote control experience and bringing more convenience to your daily life.

It has high copy accuracy, high copy efficiency, and is easy to install and use.

Ultra-small data code copy error and copy oscillation resistance. The secret is strong.

4-channel radio-controlled machine for cars, roofs, garage doors, gates, alarm systems, heating systems, home automation and more.

Feature:

Operating voltage: DC6V

Operating current: ≤10 mA

Working frequency: 433.92 MHz, other frequencies optional

Transmission power: ≥10 mW

Launch distance: 100 meters (open space)

Frequency deviation: ±0.2 MHz

Transmission rate: 50 to 60 KHZ

Vibration resistance: according to customer requirements

Working chip: 2262, 2260, 2240, 1527, copy type, etc.

This package includes:

1x Electric garage door remote control

instruct:

During the configuration and sales process, most customers hope to replace the original remote control with a universal remote control, which has not yet been developed. You can configure your remote control in 2 seconds if the three

conditions suivantes sont remplies :

Condition 1: The original remote control can be used normally.

Condition 2: Know the transmission frequency of the original remote control.

Scenario 3: The original remote control IC is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or uncoded.

Copy method:

1. Reset before copying: Press the two buttons on the copy remote control simultaneously until the LED flashes, indicating a successful reset. After resetting, press the button on the remote control and the

LED will turn off.

2. Copy: Place the product correctly before copying. Place the original remote control and the duplicate remote control on the table. Press and hold the copy remote control with your right hand until the LED lights up and goes out,

indicating that it has entered the copy state. Use your left hand to press the buttons on the original remote control. A quick click on the LED of the remote control indicates a successful copy. The copy method is the same for multiple clés.