Universal Garage Door Remote Control Wireless Key Electric Gate Alarm

Features: Brand new and high quality. Compact design and beautiful shape&xa0;; 4 control buttons. Uses RF technology, long transmission distance, non-directional, high transmission sensitivity, no signal shielding. Four buttons can replicate four different types of chips, which means one remote control can control four different types of devices. 433 MHz, transmission distance 50-100 meters (open area) for a new remote control experience and many conveniences in daily life. High copy precision, high copy efficiency, easy to install and use. The data code copy error is extremely low and the oscillation is replication-proof. French: Strong confidentiality. 4 channel remote control for car, roof, garage door, gate, alarm system, heating, home automation, etc.Functional Features Operating voltage: DC6V Operating current: ≤10mA Operating frequency: 433.92MHz, other frequencies are optional Transmission power: ≥10mW Transmission distance: 100 meters (open) Frequency deviation: ±0.2MHz Transmission rate: 50--60KHZ Product Description During the configuration and sales process, the Most customers want to replace the original remote control with a regular remote control, even if such a remote control has not been developed yet. If the following three conditions are met, you can configure the remote control in 2 seconds: Condition I: The original remote control can be used normally. Condition II: The transmission frequency of the original remote control is known. Condition III: The original remote control IC is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or no code.Copy method: 1. Reset before copying: Press both buttons on the copy remote control simultaneously until the light flashes. This indicates that the reset was successful. After resetting, press the buttons on the remote control and the indicator light turns off. 2. Copy: Place the product correctly. 2. Copy: Please position the product correctly before copying. Place the original remote control and the copy remote control on a table. Press the copy remote control with your right hand until the light turns off, indicating that copying is in progress. Press the button on the original remote control with your left hand. A short press on the remote control indicator indicates that the copy was successful. The copy method is the same as for other buttons.Tip: If the remote control password has been reset and you want to restore it, press both buttons until the light flashes. Technical parameters: 1. The original remote control IC model is 2262 2260 1527 2240, which is compatible with the integrated circuit. 2. Vibration resistance and address code should not be considered. This item is compatible with vibration resistance and address code. 3. The remote control is not compatible with the integrated circuit. 3. The non-compatible chip is HCS300 30, which is compatible with the scroll code chip. 4. The battery of this product is not compatible with vibration resistance and address code. 4. The battery of this product has a voltage of 12 V. Please replace it if the remote control range is insufficient.