Universal garage door remote control, wireless key-operated electric door remote control, 433M garage door access key remote control

Function Description: Compact design and attractive appearance; 4-button control. Thanks to radio frequency technology, the transmission distance is long, non-directional, with high transmission sensitivity and no signal blockage. The four buttons can each copy four different types of chips, meaning one remote control can operate four different types of devices. Operating at 433 MHz, with a transmission distance of 50-100m (open space), it offers a new remote control experience and brings more convenience to your daily life. It has high copying accuracy, high copying efficiency, and is easy to install and use. It features ultra-small data code copying errors and strong copy oscillation resistance. The system is secure. This 4-channel radio-controlled device is suitable for cars, roofs, garage doors, gates, alarm systems, heating systems, home automation, and more. Features: Operating Voltage: DC6V Operating Current: ≤10 mA Working Frequency: 433.92 MHz, other frequencies optional Transmission Power: ≥10 mW Transmission Distance: 100 meters (open space) Frequency Deviation: ±0.2 MHz Transmission Rate: 50 to 60 kHz Vibration Resistance: As per customer requirements Working Chip: 2262, 2260, 2240, 1527, copy type, etc. This package includes: 1x Electric Garage Door Remote Control Instructions: During the setup and sales process, most customers hope to replace their original remote control with a universal remote, which has not yet been developed. You can set up your remote control in 2 seconds if the following three conditions are met: Situation 1: The original remote control can be used normally. Condition 2: Know the transmission frequency of the original remote control. Scenario 3: The original remote control IC is PT2262, PT2264, SC2262, SC2260, HS2262, 2260, LX2262, 2260, EV1527, PT2240, or uncoded. Copying Method: 1. Reset before copying: Simultaneously press both buttons on the copy remote until the LED flashes, indicating a successful reset. After resetting, press the button on the copy remote, and the LED will turn off. 2. Copying: Position the product correctly before copying. Place the original remote and the copy remote on the table. Press and hold the copy remote with your right hand until the LED indicator lights up and then turns off, indicating that it has entered copy mode. Use your left hand to press the buttons on the original remote. A quick click of the LED on the copy remote indicates a successful copy. The copying method is the same as for multiple keys.