Universal garage door remote control, wireless key-operated electric door remote control, 433M garage door access key remote control

Describe

Function:

Compact design and attractive appearance; 4-button control.

Thanks to radio frequency technology, the transmission distance is long, non-directional, with high transmission sensitivity and no signal blockage.

The four buttons can each copy four different types of chips, meaning one remote control can operate four different types of devices.

433 MHz, 50-100m transmission distance (open space), providing you with a new remote control experience and bringing more convenience to your daily life.

It has high copying accuracy, high copying efficiency, and is easy to install and use.

Ultra-small data code copying error and resistance to copy wobble.

The secret is strong.

4-channel radio-controlled machine for cars, roofs, garage doors, gates, alarm systems, heating systems, home automation, and more.

Features:

Operating Voltage: DC6V

Operating Current: ≤10 mA

Working Frequency: 433.92 MHz, other frequencies optional

Transmission Power: ≥10 mW

Throwing Distance: 100 meters (open space)

Frequency Deviation: ±0.2 MHz

Transmission Rate: 50 to 60 kHz

Vibration Resistance: As per customer requirements

Working Chip: 2262, 2260, 2240, 1527, copy type, etc.

This package includes:

1x Electric Garage Door Remote Control

Instructions:

During the setup and sales process, most customers hope to replace the original remote control with a universal remote control, which has not yet been developed. You can configure your remote control in 2 seconds if the following three conditions are met:

Situation 1: The original remote control can be used normally.

Condition 2: The transmission frequency of the original remote control is known.

Scenario 3: The original remote control's integrated circuit is PT2262, PT2264, SC2262, SC2260, HS2262, 2260, LX2262, 2260, EV1527, PT2240, or uncoded.

Copying Method:

1. Reset before copying: Press both buttons on the copy remote control simultaneously until the LED flashes, indicating a successful reset. After resetting, press the button on the remote control, and the LED will turn off.

2. Copy: Position the product correctly before copying.

Place the original remote and the duplicate remote on the table. Press and hold the copy remote with your right hand until the LED indicator lights up and then goes out, indicating that it has entered copy mode. Use your left hand to press the buttons on the original remote. A quick click of the remote's LED indicates a successful copy. The copying method is the same as for multiple keys.