Universal Gate Remote Control, 2 Pieces Universal Gate Remote, Universal Gate Remote Control, Compatible with 433.92 MHz Rolling Code with 4 Buttons

Extensive Compatibility Features: This universal gate remote supports cloning of fixed-code and 433.92 MHz learning-code remotes, is compatible with Marantec rolling-code devices, and can be used for garage doors, telescopic gates, skylights, and home appliance controls. However, it cannot copy encrypted rolling codes (such as the KeeLoq algorithm). Safety and Error-Proof Design: This universal gate remote features a portable key fob design and a sliding protective cover with a button to prevent accidental contact that could cause the gate to open and close abnormally. The aluminum alloy casing is drop-resistant and interference-resistant, and suitable for environments ranging from -20℃ to 60℃. Convenient programming operation: The universal gate remote can erase the old code by pressing the AB key combination for 3 seconds (the indicator light will flash to confirm). It supports quick cloning of the original remote signal, requires no professional tools, and pairing is performed in 3 steps according to the manual. Multi-scenario application: The universal gate remote covers scenarios such as car remote control, control of industrial equipment (such as rolling doors/electric curtains), home security (lighting/ventilation devices), etc., and has strong signal penetration (50 meters outdoors/stable through walls). Compatible chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, SMC5326 (all manufacturers), SC5262, HT12E, HT12D, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, SM5028S, series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers) (Foreign non-standard codes and domestic and foreign rolling codes are partially compatible) Instructions: Press and hold buttons A and B on the new remote simultaneously for approximately three seconds. A rapid flashing of the indicator light indicates that the reset was successful. (Note: This step is not necessary for the old remote.) Place the old remote on the left and the new one on the right, so they are touching. Press and hold button "A" on both remotes until the indicator light on the new remote flashes red, then release it. Repeat this process to reset the other three buttons.