USB Temperature Data Logger, 10000 Group Storage, High-Precision Disposable Portable Recorder

Features:1.[USB Connector] This temperature recorder has a USB connector design, allowing it to connect directly to a PC or phone for reading, without cables or drivers.
2.[PDF Data Report] Once recording is complete, you can directly insert the temperature data recorder into your computer to obtain the PDF report.
3.[10,000 Data Set Storage] The recorder has a wide temperature measurement range and can store 10,000 data sets.
4.[High Accuracy] The temperature recorder records the temperature every ten minutes, with high accuracy and sensitivity, and is small and easy to carry.
5. [Wide Application] The data logger is widely used for monitoring and recording the temperature of food, medicines, chemicals, etc.during transportation and storage.

Specifications:

Item Type: Temperature Data Logger
Material: ABS
Model: TempU05
Size: Approx. 67x28mm/2.64x1.1in
Type: Disposable
Accuracy: ±0.5℃ (-20℃ to 40℃)
Out of range: ±1℃
Recording interval: 10 minutes (60 days)
Optional data capacity: 10,000
Temperature range Alarm Temperature: 8℃ (46.4℉)
Delay Recording: 30 minutes
Working Ambient Temperature: -30℃ to +60℃
Introduction:
Disposable USB Temperature Logger is a simple and portable temperature recorder designed for cold chain. This product is widely used to monitor the transportation and storage processes of food, medical, chemical, etc. After saving, you can insert it directly into the computer to get the PDF report.
How to use:
1.Press and hold the Start/Stop button for more than 3 seconds. The OK indicator light will remain on for 3 seconds, indicating that the device has started recording. You can then place the device in the environment you need to monitor.
2.During the recording process, the equipment will automatically turn on every 10 seconds.If the normal indicator light (green) illuminates every 10 seconds, this means the equipment is not overheating during the recording process.If the alarm indicator light (red) illuminates every 10 seconds, this means there is overheating during the recording process.Note: As long as overheating is detected during the recording process, the green indicator light will not illuminate.
3.Press and hold the Start Stop button for more than 3 seconds. The alarm indicator (red light) will remain on for 3 seconds, indicating that the device has stopped recording.The device will also automatically stop recording when it is full of data.Once the device stops recording, the indicator will not automatically flash.To check if the device is overheating during recording, briefly press the Start Stop button.If the normal indicator (green light) is on, it means that the device is not overheating during recording.If the alarm indicator (red light) is on, it means that the device has stopped recording.4.Remove the waterproof packaging bag and insert the device into the computer's USB port. The normal indicator light (green) and the alarm indicator light (red) will illuminate during the PDF file generation process.When the file is generated, the normal indicator light (green light) will continue to illuminate until the recorder is removed from the computer.

Package List:1 x Temperature Data Logger